CV N.S. Hadi

Muhammad N.S. Hadi

  AWT IMAGE

Date of birth

  1. 01. 1966

 

Position

 Associate Professor

Program area

  Structural Engineering

Phone

  +02-4221-4762          Fax: +02-4221-3238

E-mail

  mhadi AT uow.edu.au

Deparment 

 Ph.D.

Computer aided design of structures

University of Leeds

UK

  1989

 M.Sc.

Optimum design of structures

University of Baghdad

Iraq

  1980

 M.Sc. (Hons)

Civil Engineering

University of Baghdad

Iraq

  1977


Professional Affiliation

Areas of Interest

Work Experience

Journals Papers

Conference Proceedings

Conference Papers

Others

Reports


Professional Affiliation

  • Chartered Professional Engineer, MIEAust, CPEng, NPER
  • Past Chair Illawarra-Sutherland Regional Group Committee, Engineers Australia
  • Member of the American Society of Civil Engineers, M-ASCE
  • Member of the American Concrete Institute, M-ACI
  • Member of the International Association for Bridge and Structural Engineering, IABSE
  • Member of Concrete Institute of Australia  

Areas of Interest

  • Structural Engineering
  • Progressive collapse of structures
  • Concrete Structures
  • FRP
  • Computer Applications in Structural Engineering including GA and neural networks
  • Numerical Modelling

Work Experience

  2007-present

  Associate Professor

  School of Civil, Mining and Env Eng University of Wollongong

  2004-2007

  Associate Professor

  Faculty of Engineering Discipline Advisor University of Wollongong

  1999-2003

  Senior Lecturer
Director of Studies

  Faculty of Engineering University of Wollongong

  1994-1998

  Lecturer

  Department of Civil and Mining Engineering University of Wollongong

  1993-1994

  Research Assistant/ Tutor

  School of Civil Engineering University of South Australia The Levels

  1989-1992

  Lecturer

  Department of Civil Engineering University of Technology Baghdad

 

  Lecturer
(Part Time)

  Department of Civil Engineering Al-Mustansiriya University Baghdad

 

  Structural Engineer (Part Time for two years)

  Al-Mustansiriya Consultancy Bureau Baghdad

  1985-1989

  PhD Scholar/Tutor

  Department of Civil Engineering The University of Leeds Leeds

  1983-1985

  Lecturer

  Department of Civil Engineering University of Technology Baghdad

  1980-1983

  Civil/Structural Engineer

  Military Service (Air Force) Baghdad

  1975-1984

  Civil Engineer
(Part Time)

  Rafidain Engineering Laboratory Baghdad

Publications

Journals Papers

  1. Patel, VI, Liang, QQ and Hadi, MNS Inelastic stability analysis of high strength rectangular concrete-filled steel tubular slender beam-columns. Interaction and Multiscale Mechanics, An International Journal. Letter of acceptance 7 Nov 2011. 
  2. Sharafi, P, Hadi, MNS, Teh, LH. A Heuristic Approach for Optimum Cost and Layout Design of 3D Reinforced Concrete Frames. J Structural Eng, ASCE, Letter of acceptance 24 Sept 2011. 
  3. Patel, VI, Liang, QQ and Hadi, MNS (2012). High strength thin-walled rectangular concrete-filled steel tubular slender beam-columns, Part I: Modeling. Journal of Constructional Steel Research 70 (2012) 377–384. 
  4. Patel, VI, Liang, QQ and Hadi, MNS (2012). High strength thin-walled rectangular concrete-filled steel tubular slender beam-columns, Part II: Behavior. Journal of Constructional Steel Research 70 (2012) 368-376. 
  5. Hadi, M. N. & Arfiadi, Y. (2011). Moment coefficients for statically indeterminate prestressed concrete structures. Asian Journal of Civil Engineering, 12 (1), 39-59. (Publication ID=34823) 
  6. Hadi, MNS and Zhao, H. (2011). Experimental Study of HSC Columns Confined with Different Types of Mesh under Eccentric and Concentric Loads. Journal of Materials in Civil Engineering, ASCE. Vol. 23, No. 6, June 1, 2011, pp. 823-832. 
  7. Hadi, MNS (2011). Rehabilitating Destructed Reinforced Concrete T Connections by Steel Straps. Construction and Building Materials Journal. Volume 25, Issue 2, Feb, pp. 851-858. 
  8. Kusumawardaningsih, Y and Hadi, MNS (2010). Comparative Behaviour of Hollow Columns Confined with FRP Composites. Journal of Composite Structures. Volume 93, Issue 1, Dec, pp. 198-205. 
  9. Hadi, MNS (2010). Behaviour of reinforced concrete columns wrapped with fibre reinforced polymer under eccentric loads. Australian Journal of Structural Engineering, Institution of Engineers Australia, Vol 10, No 2, pp. 169-178. 
  10. Yazici, V and Hadi, MNS. (2009). Axial Load-Bending Moment Diagrams of Carbon-FRP Wrapped Hollow Core Reinforced Concrete Columns. Journal of Composites for Construction, Vol. 13, No. 4, pp. 262-268. No. Cited = 1 
  11. Hadi, MNS (2009). Reinforcing Steel Columns with Steel Fibres. Asian Journal of Civil Engineering (Building and Housing). Vol. 10, No 1, pp. 79-95. 
  12. Hadi, MNS (2009). Behaviour of Eccentric Loading of FRP Confined Fibre Steel Reinforced Concrete Columns. Construction and Building Materials Journal. Volume 23, Issue 2, February, pp. 1102-1108. No. Cited = 5 
  13. Hadi, MNS (2008). Bond of High Strength Concrete with High Strength Reinforcing Steel. The Open Civil Engineering Journal. Volume 2, pp. 143-147. 
  14. Hadi, MNS and Elbasha, NM. (2008). Displacement Ductility of Helically Confined HSC Beams. The Open Construction and Building Technology Journal, 2008, Volume 2, pp. 270-279.  
  15. Hadi, MNS and Elbasha, NM. (2008). The effect of helical pitch on the behaviour of helically confined HSC beams. Construction and Building Materials Journal. Volume 22, Issue 5, May, pp. 771–780. 
  16. Hadi, MNS (2007). The Behaviour of FRP Wrapped HSC Columns under Different Eccentric Loads . Journal of Composite Structures . Volume 78, Issue 4, June 2007, Pages 560-566. No. Cited = 6 
  17. Hadi, MNS. (2007). Behaviour of FRP Strengthened Concrete Columns under Eccentric Compression Loading. Journal of Composite Structures . Volume 77, Issue 1, January, pp. 92-96. No. Cited = 13 
  18. Hadi, MNS and Elbasha, NM. (2007). Effects of Tensile Reinforcement Ratio and Compressive Strength on the Behaviour of Over Reinforced Helically Confined HSC Beams. Construction and Building Materials Journal. Volume 21, Issue 2, February 2007, Pages 269-276. No. Cited = 3 
  19. Hadi, MNS. (2007). Using Fibres to Enhance the Properties of Concrete Columns. Construction and Building Materials Journal. Volume 21, pp. 118-125. No. Cited = 2 
  20. Jalalifar, H, Aziz, NI and Hadi, MNS. (2006). The effect of surface profile, rock strength and pretension load on bending behaviour of fully grouted bolts. Geotechnical and Geological Engineering 24:1203–1227. No. Cited = 3 
  21. Arfiadi, Y. and Hadi, MNS. (2006). Continuous Bounded Controllers for Active Control Structures. The International Journal of Computers and Structures. Volume 84, Issue 12, May, pp. 798–807. No. Cited = 4 
  22. Hadi, MNS. (2006). Comparative Study of Eccentrically Loaded FRP Wrapped Columns . Journal of Composite Structures . Volume 74, Issue 2, pp. 127–135. No. Cited = 10 
  23. Hadi, MNS. (2006). Behaviour of FRP Wrapped Normal Strength Concrete Columns under Eccentric Loading. Journal of Composite Structures. Volume 72, Issue 4, Pages 503-511. No. Cited = 16 
  24. Elbasha, NM and Hadi, MNS. (2005). Experimental testing of helically confined HSC beams. Structural Concrete. Thomas Telford and fib. Vol. 6, no. 2, pp. 43-48. No. Cited = 2 
  25. Hadi, MNS. (2005). Helically Reinforced HSC Beams Reinforced with High Strength Steel. International Journal of Materials and Product Technology (IJMPT). Vol. 23, Nos. 1/2, pp.138-148. No. Cited = 1 
  26. Hadi, MNS. (2005). Behaviour of High Strength Concrete Columns Confined with Helices. Construction and Building Materials Journal. Vol. 19, Number 2, pp. 135-140. No. Cited = 1 
  27. Bodhinayake, B.C. and Hadi, MNS (2004). Design of Flexible Pavements Based on Finite Element Analysis. The International Journal of Pavement Engineering & Asphalt Technology. Vol. 5, issue 2, Dec. pp. 55-68. 
  28. Jalalifar, H, Aziz, N, and Hadi, M. N. S. (2004). Non-linear Analysis of Bolt-Grout-Concrete Interaction in Reinforced Shear Joint. Journal of Mines, Metals, and Fuels. Vol 52, Nos 9 and 10, September –October, pp 208-216. No. Cited = 1 
  29. Hoban, G., Lefoe, G., James, B., Curtis, S., Kaidonis, M., Hadi, MNS, Lipu, S., McHarg, C., Collins, R. (2004). A Web Environment Linking University Teaching Strategies with Graduate Attributes. Journal of University Teaching and Learning Practice. University of Wollongong. Vol. 1, Issue 1, pp. 10-19. 
  30. Hadi, MNS and Li, J. (2004). External Reinforcement of High Strength Concrete Columns. Journal of Composite Structures . Vol 65 Nos. 3-4, pp 279-287. No. Cited = 17 
  31. Hadi, MNS. (2003). Behaviour of Wrapped HSC Columns Under Eccentric Loads. Asian Journal of Civil Engineering (Building and Housing). Vol. 4, Nos 2&3, pp. 91-100. No. Cited = 2 
  32. Hadi, MNS (2003). High Strength Columns Reinforced with High Strength Steel. Journal of the International Association of Concrete Technology. Vol. 1, Number 2, pp. 161-170. 
  33. Hadi, MNS and Symons, MG. (2003). Using Drucker-Prager Model for the Analysis of Recycled Bound Road Pavements. The International Journal of Pavement Engineering & Asphalt Technolog y. Vol. 4, issue 2, Dec. pp. 7-17. 
  34. Hadi, MNS and Bodhinayake, BC. (2003) Non-Linear Finite Element Analysis of Flexible Pavements. The International Journal of Advances in Engineering Software. Vol. 34, issue 11-12, Dec. pp. 657-662. No. Cited = 13 
  35. Hadi, MNS. (2003). Neural Networks Applications in Concrete Structures. The International Journal of Computers and Structures. Vol 81, No. 6 pp 373 – 381. No. Cited = 38 
  36. Hadi M.N.S. and Schmidt L.C. (2003) Use of helices for enhancing the properties of reinforced concrete beams. Int. J. Mat. And Prod. Tech., Vol. 19, Nos 3/4, pp. 247–258. . No. Cited = 2 
  37. Hadi, MNS. (2003). Retrofitting of Shear Failed Reinforced Concrete Beams. Journal of Composite Structures. Volume 62, Issue 1, October 2003, Pages 1-6. No. Cited = 7 
  38. Li, J. and Hadi, MNS. (2003). Behaviour of Externally Confined High Strength Concrete Columns under Eccentric Loading. Journal of Composite Structures. Volume 62, Issue 2, November 2003, Pages 145-153. No. Cited = 30 
  39. Hadi, MNS and Schmidt, LC. (2002). Use of Helices in Reinforced Concrete Beams. ACI Structural Journal. Vol. 99, No. 2, pp. 191-198. No. Cited = 10 
  40. Hadi, MNS (2001). Life Cycle Cost Analysis of Pavements. The International Journal of Pavement Engineering & Asphalt Technolog y. Eds. H Al Nageim, AR Woodside, R Hunter and G. Row. ISSN 1464-8164. Vol. 2, Issue 1, May. pp.61-74. 
  41. Arfiadi, Y. and Hadi, MNS (2001). Optimal Direct (Static) Output Feedback Controller Using Real Coded Genetic Algorithms. Int. J. of Computers and Structures. ISSN 0045-7949, Vol. 79, Issue 17, July, pp. 1625-1634. No. Cited = 16 
  42. Hadi, MNS and Arfiadi, Y. (2001). Optimum Rigid Pavement Design by Genetic Algorithms. Int. J. of Computers and Structures. ISSN 0045-7949, Vol. 79, Issue 17, July, pp. 1617-1624. No. Cited = 6 
  43. Hadi, MNS (2001). Developing Specifications for Unsealed Road Pavements. The International Journal of Pavement Engineering & Asphalt Technolog y. Eds. H Al Nageim, G. Row and D.J. Pearson. ISSN 1464-8164. Vol. 2, Issue 2, pp. 36-58. 
  44. Arfiadi, Y. and Hadi, MNS (2000). Passive and Active Control of Three-Dimensional Buildings. Earthquake Engineering & Structural Dynamics, An International Journal. John Wiley & Sons, Vol. 29, pp. 377-396. No. Cited = 17 
  45. Hadi, MNS (2000). Optimum Design of Rigid Road Pavements Using AUSTROADS. The International Journal of Pavement Engineering & Asphalt Technology. Eds. H Al Nageim, AR Woodside and R Hunter. ISSN 1464-8164. Vol. 1, Issue 1, pp. 13-26. 
  46. Hadi, MNS and Malik, AA (2000). Flexipave: a Finite Element Program for the Analysis of Flexible Pavements. The International Journal of Construction Information Technology. Eds. Alshawi and Skitmore, Vol. 8, No. 1, pp. 29-52. 
  47. Hadi, MNS (2000). Subgrade Failure Criterion for the Design of Flexible Pavements Based on Higher Wheel Loads. The International Journal of Pavement Engineering & Asphalt Technology. Eds. H Al Nageim, AR Woodside, R Hunter and G. Row. ISSN 1464-8164. Vol. 2, Issue 1, pp. 14-27. 
  48. Hadi, MNS and Das, S (1999). A Solution Approach for Non-Linear Analysis of Concrete Members. Dirasat. ISSN 1560-4551, Vol. 26, No. 2, pp. 300-308. 
  49. Hadi, MNS and Arfiadi, Y (1998). Optimum Design of Absorber for MDOF Structures. ASCE, Journal of Structural Engineering, 124(11), 1272-1280. No. Cited = 29 
  50. Hadi, MNS (1998). “COLD-STEEL” A Computer Program for the Design of Cold Formed Steel Structures. The International Journal of Construction Information Technology. Editors: Mustafa Alshawi and Martin Skitmore, ISSN 0968-0365, Vol. 6, No.2, pp. 39-65. 
  51. Hadi, MNS (1996). Utilising the Capabilities of Spreadsheets for Designing Structures. The International Journal of Construction Information Technology. Eds. Alshawi and Skitmore, Vol. 4, No.2, pp. 15-28. 
  52. Hadi, MNS and Watson, AS (1996). The Manipulation of Engineering Design Calculations by a Calculation Processing System: 2. Implementation. Int. J. of Computers and Structures. Editor-in-chief H. Liebowitz, Pergamon, Vol. 59, No. 1, pp. 191-193, April 1996. 
  53. Hadi, MNS and Symons, MG (1996). Computing Stresses in Road Pavements Using CIRCLY, NASTRAN, and STRAND6. Australian Civil/Structural Engineering Transactions, IEAust. Vol. CE38, No. 2, 3, and 4, pp. 89-93. No. Cited = 1 
  54. Hadi, MNS and Watson, AS (1995). The Manipulation of Engineering Design Calculations by a Calculation Processing System: 1. Theory. Int. J. of Computers and Structures. Editor-in-chief H. Liebowitz, Pergamon, Vol. 57, No. 4, pp. 737-744, November 1995.

Conference Proceedings  

  1. Hadi, MNS, Schmidt, LC and Basu, A. (2001). Proceedings of the Second International Conference on Mechanics of Structures, Materials and Systems, MSMS 2001 . ISBN 0 86418 656 8, University of Wollongong, Wollongong, 14-16 February, 396 pp.
  2. Hadi, MNS and Schmidt, LC. (1999). Proceedings of the International Conference on Mechanics of Structures, Materials and Systems . ISBN 0 86418 588 X, University of Wollongong, Wollongong, 17-19 February, 388 pp.  

Conference Papers 

  1. Hadi, MNS and Widiarsa, BR (2011). Behaviour of FRP Wrapped Square Reinforced Concrete Columns under Eccentric Loading. The Concrete Institute of Australia’s 25th Biennial Conference, Perth, Western Australia, 12-14 October 2011, Paper 10.2, 10 pages.
  2. Fanggi, BAL and Hadi, MNS (2011). The Behaviour of Carbon Fibre Reinforced Polymer Confined Concrete Cylinders under High Temperature Exposure. The Concrete Institute of Australia’s 25th Biennial Conference, Perth, Western Australia, 12-14 October 2011, Paper 14.2, 10 pages.
  3. Hadi, MNS and Uz, ME (2011). Seismic Modal Response Histories of Two-Way Asymmetric Adjacent Buildings with Soil-Structure Interaction Effects Subject to Earthquake Excitations. The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing (CC2011), Chania, Crete, Greece on 6-9 September 2011. Paper 217, 18 pages.
  4. Hadi, MNS and Saeed Alrudaini, T.M (2011). Preventing the Progressive Collapse of Reinforced Concrete Buildings. The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing (CC2011), Chania, Crete, Greece on 6-9 September 2011. Paper 63, 12 Pages.
  5. Uz ME and Hadi, MNS (2011). Seismic history analysis of asymmetrical adjacent buildings with soil-structure interaction consideration. 8th International Conference on Earthquake Resistant Engineering Structures (ERES 2011) which was held on 7 - 9 September 2011 at Chianciano Terme, Italy, pp. 225-236.
  6. Hadi, MNS and Yazici, V (2011). Testing FRP Confined Columns under Eccentric Loading. ISEC-6, The Sixth International Structural Engineering and Construction Conference Zürich, June 21-26, 2011. pp. 569-573
  7. Hadi, MNS and Uz, ME (2011). Investigation of the effect of pounding and impact on Base Isolated Adjacent Buildings due to Earthquakes. ISEC-6, The Sixth International Structural Engineering and Construction Conference Zürich, June 21-26, 2011. pp. 595-600
  8. Zhao, H and Hadi, MNS (2011). Experimental Investigation on Using Mesh as Confinement materials for High Strength Concrete Columns. The Twelfth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-12), Hong Kong Convention and Exhibition Centre (HKCEC), Hong Kong SAR, China. 26-28 Jan 2011, Paper N107, 8 pages.
  9. Hadi, MNS (2011). External Reinforcement of Concrete Columns. 11th Underground Coal Operators' Conference, 10-11 Feb 2011, University of Wollongong, pp. 121-128.
  10. Yazici, V and Hadi, MNS (2011). Increasing the flexural stiffness of FRP wrapped reinforced concrete columns. The 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21), Victoria University (VU), Melbourne, Australia., 7-10 December 2010. pp. 161-165.
  11. Hadi, MNS and Saeed Alrudaini, T.M (2011). A new system for reinforced concrete buildings to prevent potential progressive collapse. The 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21), Victoria University (VU), Melbourne, Australia., 7-10 December 2010. pp. 173-177.
  12. Elbasha, NM and Hadi, MNS (2011). Establishing Model for the Displacement Ductility Index of HSC Beams. The 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21), Victoria University (VU), Melbourne, Australia., 7-10 December 2010. pp. 257-260.
  13. Uz ME and Hadi, MNS (2011). Investigating the Effect of Pounding for Inelastic Base Isolated Adjacent Buildings under Earthquake Excitations. The 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21), Victoria University (VU), Melbourne, Australia., 7-10 December 2010. pp. 329-334.
  14. Hadi, MNS. (2010). Behaviour of FRP Wrapped Circular High Strength Concrete Columns under Different Loading Conditions. RTA Annual Bridge Conference Bridges: Maximising Service Life 01—02 December 2010. Sydney.
  15. Hadi, MNS and Uz, ME. (2010). Base Isolated Adjacent Buildings Considering the Effect of Pounding and Impact due to Earthquakes. The Ninth International Congress on Advances in Civil Engineering (ACE 2010), Karadeniz Technical University, Trabzon from 27 to 30 September 2010. SEE-018, 8 pages.
  16. Yazici, V and Hadi, MNS (2010). Limiting the Slenderness Effect due to FRP Wrapping in Reinforced Concrete Columns. The Ninth International Congress on Advances in Civil Engineering (ACE 2010), Karadeniz Technical University, Trabzon from 27 to 30 September 2010. SEE-019, 6 pages.
  17. Saeed Alrudaini, T.M and Hadi, MNS (2010). A New Design to Prevent Progressive Collapse of Reinforced Concrete Buildings. The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010 CECAR 5/ASEC 2010, 8-12 Aug Sydney, Australia. Paper No. 154, 6 pages.
  18. Zhao, H and Hadi, MNS (2010). Investigation on the Viability of Using Fly Mesh as External Confinement for High Strength Concrete Columns. The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010 CECAR 5/ASEC 2010, 8-12 Aug Sydney, Australia. Paper No. 107, 6 pages.
  19. Rashidi, M and Hadi, MNS (2010). Modelling of High Strength Concrete Reinforced Columns Wrapped with FRP. The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010 CECAR 5/ASEC 2010, 8-12 Aug Sydney, Australia. Paper No. 286, 6 pages.
  20. Hadi, MNS and Uz ME (2010). Inelastic Base Isolated Adjacent Buildings under Earthquake Excitation with the Effect of Pounding. The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010 CECAR 5/ASEC 2010, 8-12 Aug Sydney, Australia. Paper No. 155, 6 pages.
  21. Elbasha, NM and Hadi, MNS (2010). A Model for Predicting the Displacement Ductility Index of HSC Beams. The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010 CECAR 5/ASEC 2010, 8-12 Aug Sydney, Australia. Paper No. 324, 6 pages.
  22. Hadi, MNS and Yazici, V (2009). Behaviour of FRP Wrapped Circular Reinforced Concrete Columns. The Fifth International Structural Engineering and Construction Conference September 21-27, 2009 Las Vegas, NV, USA. pp. 215 -220.
  23. Hadi, MNS and Kusumawardaningsih, Y (2009). Experimental investigation of FRP wrapped RC circular and square hollow columns. The Fifth International Structural Engineering and Construction Conference September 21-27, 2009 Las Vegas, NV, USA. pp. 235-240.
  24. Kusumawardaningsih, Y and Hadi, MNS (2009). Concentric Loading of FRP Confined High Strength RC Columns. 24th Biannual Conference of the Concrete Institute of Australia. 17 - 19 September 2009, Luna Park, Sydney. Paper 4b-2, 7 pages.
  25. Hadi, MNS and Uz, ME. (2009). Improving the Dynamic Behaviour of Adjacent Buildings by Connecting them with Fluid Viscous Dampers. The 2nd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering–COMPDYN 2009. M. Papadrakakis, N.D. Lagaros, M. Fragiadakis (eds.), Rhodes, Greece, 22–24 June 2009. 16 pages.
  26. Kusumawardaningsih, Y and Hadi, MNS (2009). Experimental Investigation of FRP Wrapped Hollow RC Columns. FRPRCS-9, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Sydney 13-15 July 2009. 4 pages
  27. Yazici, V and Hadi, MNS (2009). Behaviour of FRP Wrapped Circular Concrete Columns. FRPRCS-9, 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, Sydney 13-15 July 2009. 4 pages.
  28. Uz, ME and Hadi, MNS (2009). Dynamic Analyses of Adjacent Buildings Connected by Fluid Viscous Dampers. Seventh World Conference on Earthquake Resistant Engineering Structures ERES VII, WIT Transactions on the Built Environment, Vol 104. pp. 139-150.
  29. Jeffry, R and Hadi, MNS (2009). Improving the Strength and Ductility of High Strength Reinforced Concrete Beams. 10TH INTERNATIONAL CONFERENCE ON CONCRETE ENGINEERING AND TECHNOLOGY CONCET’09, Malaysia, 2-4 March 2009. Paper number 6, 8 pages.
  30. Yazici, V and Hadi, MNS (2009). Interaction Diagrams for FRP Wrapped Circular Hollow Columns. Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, editors T. Aravinthan, W. Karunasena and H. Wang, CRC Press, Toowoomba, Australia, 2-5 Dec 2008. pp. 55-60.
  31. Jeffry, R and Hadi, MNS (2009). Improving the Ductility of Over-Reinforced HSC Beams Using Different Helix Diameters. Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, editors T. Aravinthan, W. Karunasena and H. Wang, CRC Press, Toowoomba, Australia, 2-5 Dec 2008. pp. 457-462.
  32. Hadi, MNS (2008). An Investigation of the Behaviour of Steel and Polypropylene Fibre Reinforced Concrete Slabs. Harnessing Fibres for Concrete Construction, Proceedings of the Int Conf . Dundee, Scotland, UK: IHS BRE Press. pp. 233-244.
  33. Jeffry, R and Hadi, MNS (2008). The Effect of Confinement Shapes on Over Reinforced HSC Beams. Proceedings of World Academy of Science Engineering and, Technology. Volume 30, ISSN 1307-6884, July 2008. pp. 286-293.
  34. Hadi, MNS (2008). Behaviour of Fibre RC Columns Wrapped with FRP under Eccentric Loads. Australasian Structural Engineering Conference (ASEC), 26 – 27 June 2008, Melbourne Australia ISBN 978 1 877040 70 2. Paper 035. 10 pages.
  35. Hadi, MNS (2008). Strengthening reinforced concrete T connections by steel straps. First International Symposium on Life-Cycle Civil Engineering (IALCCE’08), Life-Cycle Civil Engineering – Biondini & Frangopol (eds), Taylor & Francis Group, London, ISBN 978-0-415-46857-2,Varenna, Lake Como, Italy, June 11-14, 2008. pages. 565-570.
  36. Hadi, MNS (2007). Eccentric Loading of FRP Confined Reinforced Concrete Columns. The 23rd Biennial Conference of the Concrete Institute of Australia. DESIGN, MATERIALS & CONSTRUCTION, 18–20 October 2007 Adelaide, Australia, ISBN ISBN 0 909375 78 X. pp. 751-760.
  37. Liang, QQ and Hadi, MNS (2007). Nonlinear Analysis and Behavior of Concrete-Filled Steel Tubular Beam-Columns. 4th International Structural Engineering and Construction Conference, ISEC – 4. “Innovations in Structural Engineering and Construction”, Editors Y.M. Xie and I. Patnaikuni, Balkema, Taylor & Francis, Melbourne, 26 – 28 September 2007, pp. 777-782.
  38. Hadi, MNS (2007). Behaviour of fibre reinforced concrete slabs. 4th International Structural Engineering and Construction Conference, ISEC – 4. “Innovations in Structural Engineering and Construction”, Editors Y.M. Xie and I. Patnaikuni, Balkema, Taylor & Francis, Melbourne, 26 – 28 September 2007, pp. 407-412.
  39. Arfiadi, Y Hadi, MNS (2007). Determination of Prestressing Forces in Statically Indeterminate Structures. The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, organised by Civil-Comp Press in St. Julians, Malta, 18-21 September 2007. Paper 180, 18 pages.
  40. Hadi, MNS (2007). Modelling of High Strength Concrete Reinforced with Helical Reinforcement. The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, organised by Civil-Comp Press in St. Julians, Malta, 18-21 September 2007. Paper 174, 18 pages.
  41. Salehi, M and Hadi, MNS (2007). Continuous Unidirectional Carbon Fibre-Reinforced Concrete Beams. The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, organised by Civil-Comp Press in St. Julians, Malta, 18-21 September 2007. Paper 168, 17 pages.
  42. Hadi, MNS (2007). Behaviour of FRP Wrapped Circular Concrete Columns under Eccentric Loading. Fiber-Reinforced Polymer Reinforcement for Concrete Structures. Proceedings of the 8th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures, FRPRCS-8. Patras, Greece July 16-18, 2007. Paper 6-25, 10 pages.
  43. Hadi, MNS (2007). Eccentric Loafing of Externally Confined Fibre Reinforced Concrete Columns. Progress in Mechanics of Structures and Materials. Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials. Editors Peter J Moss and Rajesh P Dhakal. Christchurch, New Zealand, 29 Dec – 1 Dec, 2006, pp. 63-68.
  44. Hadi, MNS (2006). Eccentric Loading of FRP Wrapped Concrete Columns. 7th International Congress on Advances in Civil Engineering, ACE 2006, Yildiz Technical University, October 11-13, 2006. Paper ace-403, 10 pages.
  45. Jalallifar, H, Aziz, N and Hadi, MNS. (2006). Bolt Failure Mechanism under Lateral Loading Conditions. 2nd International Conference on:” Advances in Mineral Resources Management and Environmental Geotechnology”, Hania, Greece. 25-27 September 2006. pp. 397-404.
  46. Hadi, MNS (2006). Behaviour of FRP wrapped HSC concrete columns under eccentric loading. Materials, Experimentation, Maintenance and Rehabilitation. Proceedings of the Tenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10). August 3-5, 2006, Bangkok, Thailand, pp. 785-790.
  47. Jalalifar, H, Aziz, NIA, and Hadi, MNS. (2006). An Assessment of Load Transfer Mechanism Using the Instrumented Bolts. Coal 2006, 7th Underground Coal Operators’ Conference, Sustainable Coal Mine Development Constraint, University of Wollongong, Editors, N Aziz and W Keilich. 5-7 July. pp. 255-265.
  48. Hadi, MNS. (2006). Behaviour of FRP Wrapped Concrete Columns under Eccentric Loading. Concrete Solutions, Proceedings of the Second International Conference, BRE Press. Editors MG Grantham, RM Jauberthie and C Lanos, St Malo, Brittany, France. 27-29 June. Paper 17, pp. 131-137.
  49. Hadi, MNS. (2006). Fibre Reinforcing the Cover of Concrete Columns. 1st International Structural Specialty Conference. 2006 Annual Conference of The Canadian Society for Civil Engineering. Calgary , Canada, 23-26 May 2006. Paper number ST131, 10 pages.
  50. Hadi, MNS. (2006). Behaviour of FRP Wrapped HSC Columns under Eccentric Loads. 1st International Structural Specialty Conference. 2006 Annual Conference of The Canadian Society for Civil Engineering. Calgary, Canada 23-26 May 2006. Paper number ST130, 10 pages.
  51. Jalalifar, H, Aziz, NIA, and Hadi, MNS (2005). Rock and Bolt Properties and Load Transfer Mechanism in Ground Reinforcement. Proceedings of the 20th World Mining Congress 2005, 7-11/11/2005 Tehran, Iran, pp 629-635.
  52. Hadi, MNS (2005). Behaviour of FRP Wrapped HSC Columns under Loads with Different Eccentricities. ISEC-03 Third International Structural Engineering and Construction Conference, “Collaboration and Harmony of Creative Systems“, Editor T. Hara, Tokuyama College of Technology Shunan, JAPAN, Taylor Francis Group, London, ISBN 0 415 39037 0, September 20-23, 2005. pp. 9-14. (invited paper).
  53. Hara, T and Hadi, MNS (2005). Behavior of Eccentrically Loaded Concrete Columns with FRP Wrapping. ISEC-03 Third International Structural Engineering and Construction Conference, “ Collaboration and Harmony of Creative Systems “, Editor T. Hara, Tokuyama College of Technology Shunan, JAPAN, Taylor Francis Group, London, ISBN 0 415 39037 0, September 20-23, 2005. pp. 229-235.
  54. Hadi, MNS and Elbasha, N. (2005). The Effect of Helical Pitch on the Behaviour of Helically Confined HSC Beams. Australian Structural Engineering Conference, ASEC 2005. Newcastle. Editors: MG Stewart and B Dockrill. 11-14 September. Paper 54. 10 pages.
  55. Hara, T and Hadi, MNS (2005). Behaviour of High Strength Concrete Columns under Eccentric Loading. The Tenth International Conference on Civil, Structural and Environmental Engineering Computing Rome, Italy 30 August - 2 September 2005. Paper 175. 16 pages.
  56. Arfiadi, Y and Hadi, MNS (2005). Supplemental Hydraulic Dampers for Buildings. The Tenth International Conference on Civil, Structural and Environmental Engineering Computing Rome, Italy 30 August - 2 September 2005. Paper 204. 19 pages.
  57. Elbasha, NM and Hadi, MNS (2005). Flexural Ductility of Helically Confined HSC Beams. ConMat’05 Third International Conference on Construction Materials: Performance, Innovations and Structural Implications Vancouver, Canada, August 22-24, 2005. Paper number 50. 10 pages.
  58. Hadi, MNS and Montgomery, DG (2005). Fibre Reinforcing Concrete Columns. ConMat’05 Third International Conference on Construction Materials: Performance, Innovations and Structural Implications. Paper number 65. 10 pages.
  59. Hadi, MNS (2005). Behaviour of Wrapped Concrete Columns under Eccentric Loads. Third International Conference Composites in Construction CCC2005. Lyon, France, 11-13 July, pp. 179-185.
  60. Hadi, MNS and Montgomery, DG (2005). Investigation of Fibre Reinforcing the Cover of Concrete Columns. Global Construction: Ultimate Concrete Opportunities. Proceedings of Cement Combinations for Durable Concrete. 5-7 July 2005, Dundee, Scotland. pp. 495-504.
  61. Jalalifar, H, Aziz, N and Hadi, MNS (2005). Modelling Shearing Characteristics of Reinforced Concrete. Global Construction: Ultimate Concrete Opportunities. Proceedings of Application of Codes, Design and Regulations, 5-7 July 2005, Dundee, Scotland. pp. 541-550.
  62. Aziz, N, Jalalifar, H and Hadi, MNS (2005). The Effect pf Resin Thickness on Bolt-Grout-Concrete Interaction in Shear. Proceedings of COAL2005 – 6th Australasian Coal Operator’s Conference. Brisbance, Australia. 26-28 April 2005.
  63. Hadi, MNS and Montgomery, DG (2004). An investigation of fibre reinforcing concrete columns’ cover. Development in Mechanics of Structures and Materials, Proceedings of The 18th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 18). Editors A.J. Deeks and H. Hao. Perth 1-3 Dec 2004. Vol. 1. pp. 93-98.
  64. Hadi, MNS (2004). Eccentric Loading of Externally Confined Concrete Columns. Development in Mechanics of Structures and Materials, Proceedings of The 18th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 18). Editors A.J. Deeks and H. Hao. Perth 1-3 Dec 2004. Vol. 1. pp. 99-104.
  65. Hadi, MNS (2004). Using Fibres to Enhance the Properties of Concrete Columns. Proceedings of the 7th International Conference on Concrete Technology in Developing Countries. Innovation and Emerging Technology in Concrete Industry. 5 – 8 October 2004. Kuala Lumpur, Malaysia. University of Technology MARA. pp. 41-52.
  66. Hadi, MNS and Elbasha, NM (2004). A New Model for Helically Confined High Strength Concrete Beams. 7th International Conference on Concrete Technology in Developing Countries. Modelling and Numerical Methods for Concrete Materials. 5 – 8 October 2004. Kuala Lumpur, Malaysia. University of Technology MARA. pp. 29-40.
  67. Aziz, N, Jalalifar, H and Hadi, MNS (2004). The Effect of Rock Strength on Shear Behaviour of Fully Grouted Bolts. Ground Support in Mining and Underground Construction. Proceedings of the Fifth Int Sym on Ground Support. Perth, West Australia. 28-30 September 2004. pp. 243-251.
  68. Hadi, MNS (2004). Eccentric Loading of Externally Confined Concrete Columns. Int Conf on Bridge Engineering & Hydraulic Structures, BHS2004. Kuala Lumpur, Malaysia. ISBN 983-2871-62-X. 26-27 July 2004, pp. 207-211.
  69. Elbasha, NM and Hadi, MNS (2004). Effects of the Neutral Axis Depth of Strength Gain Factor for Helically Confined HSC Beam. Int Conf on Bridge Engineering & Hydraulic Structures, BHS2004. Kuala Lumpur, Malaysia. ISBN 983-2871-62-X. 26-27 July 2004, pp. 213-217.
  70. Hadi, MNS (2004). Strength and Ductility of FRP Wrapped Columns Under Eccentric Loads. 4th International Conference on Advanced Composite Materials in Bridges and Structures. Calgary, Alberta, July 20 – 23, 2004. ISBN 1-894662-06-7. Paper-032, 8 pages.
  71. Hadi, MNS and Montgomery, DG (2004). Strength and Ductility of Wrapped HSC Columns under Eccentric Loads. The Second International Conference on Structural Engineering, Mechanics and Computation, SEMC 2004, Cape Town, South Africa, 5-7 July 2004. pp. 1557-1562.
  72. James, B., Lefoe, G. and Hadi, MNS. (2004). Working 'through' graduate attributes: A bottom-up approach. In F. Sheehy & B. Stauble (Eds.), Transforming knowledge into Wisdom: Holistic Approaches to Teaching and Learning. Proceedings of Higher Education Research and Development Society. Vol. 27, 4-7 July, Miri, Sarawak, Malaysia, pp. 174-184. Sydney: HERDSA.
  73. Hara, T and Hadi, MNS (2004). Behavior of R/C Beam with Helical Reinforcement under Bending. Concrete under Severe Conditions: Environment and Loading, CONSEC’04. June 27-30, Seoul, Korea. B.H. Oh et al. editors. Vol. 1. pp. 1208-1215.
  74. Jalalifar, H, Aziz, NI and Hadi, MNS. (2004). Shear Behaviour of Bolts in Joints with Increased Pressure Conditions. Roofbolting in Mining, Aachen International Mining Symposia. Aachen Germany. ISBN 3-7739-5988-5, June 2-3 2004, pp. 211-226.
  75. Hadi, MNS and Kelly, D. (2004). Effectiveness of Concrete Safety Barriers. Jordan International Conference on Sustainable Development of Transportation Systems. Jordan Engineers Association, Amman, Jordan, 13-15 April 2004, session 6A.
  76. Bodhinayake, Bc and Hadi, MNS. (2004). Design of Flexible Pavements by Finite Elements. Jordan International Conference on Sustainable Development of Transportation Systems. Jordan Engineers Association, Amman, Jordan, 13-15 April 2004, session 3A.
  77. Elbasha, NM and Hadi, MNS. (2004). Investigating the Strength of Helically Confined HSC Beams. Int. Conf. Of Structural & Geotechnical Engineering, and Construction Technology, IC-SGECT’04, Mansoura, Egypt, 23-25 March 2004, pp. 817-828.
  78. Jalalifar, H, Aziz, NI, and Hadi, MNS (2004). Modelling of Sheared Behaviour Bolts Across Joints. Coal 2004, 5th Underground Coal Operators’ Conference, Coal Mine Planning. Editors, NI Aziz and B. Kininmonth, University of Wollongong, 4-6 Feb. pp. 225-232.
  79. Arfiadi, Y and Hadi, MNS (2003). Nonlinear Controllers with Bounded Magnitude of Control Forces. The Ninth East Asia-Pacific Conference on Structural Engineering and Construction, EASEC9. Bali, Indonesia 16-18 Dec. pp. CPM107-112.
  80. Hadi, MNS (2003). Testing Eccentrically Loaded Externally Reinforced High Strength Concrete Columns. The Second International Structural Engineering and Construction Conference (ISEC-02), Rome, Italy, Sept. 23-26, 2003. pp. 1843-1848.
  81. Hadi, MNS (2003). Helically Reinforced High Strength Concrete Beams. The Second International Structural Engineering and Construction Conference (ISEC-02), Rome, Italy, Sept. 23-26, 2003. pp. 1849-1854.
  82. Hadi, MNS and Alvani, KS. (2003). Discrete Optimum Design of Geometrically Non-Linear Trusses Using Genetic Algorithms. The Seventh International Conference on the Application of Artificial Intelligence to Civil and Structural Engineering. Editor BHV Topping, Egmond aan Zee, The Netherlands 2-4 September. Paper 37, 19 pages.
  83. Arfiadi, Y. and Hadi, MNS. (2003). Continuous Bounded Controller for Active Control Structures. The Ninth International Conference on Civil and Structural Engineering Computing. Editor BHV Topping. Egmond aan Zee, The Netherlands 2-4 September. Paper 115, 14 pages.
  84. Bodhinayake, B.C. and Hadi, M.N.S. (2003). A Design Chart for the Design of Flexible Pavements Based on Finite Elements. The Ninth International Conference on Civil and Structural Engineering Computing. Editor BHV Topping. Egmond aan Zee, The Netherlands 2-4 September. Paper 26, 15 pages.
  85. Li, J., Moulsdale, M. and Hadi, MNS. (2003). Externally Confined High Strength Concrete Columns under Eccentric Loading. 6th International Symposium on Fibre-Reinforced Polymer (FRP) Reinforcement for Concrete Structures (FRPRCS-6), 8 - 10 July 2003, Singapore. Editor: K.H. Tan, NUS. World Scientific, Vol. 1, pp. 613-622.
  86. Xiong, Z. H. and Hadi, MNS. (2003). Strength Analysis Of Sheared Beams Retrofitted with Strengthening Materials. 6th International Symposium on Fibre-Reinforced Polymer (FRP) Reinforcement for Concrete Structures (FRPRCS-6), 8 - 10 July 2003, Singapore. Editor: K.H. Tan, NUS. World Scientific, Vol. 1, pp. 487-496.
  87. Bodhinayake, BC and Hadi, MNS. (2003). A Design Chart for the Design of Flexible Pavements Based on Finite Elements 21st ARRB Conference 19-22 May 2003. v 21. p 125-139.
  88. Hadi, MNS (2003). Enhancing the Ductility and Strength of HSC Beams Reinforced with HSS. Concrete Institute of Australia 21st Biennial Conference 2003 "Concrete In The 3rd Millennium" 17 - 19 July 2003. pp. 109-118.
  89. Hadi, MNS, Li, J, Moulsdale, M (2003). Strength And Ductility Of Wrapped HSC Columns Under Eccentric Loads. Concrete Institute of Australia 21st Biennial Conference 2003 "Concrete In The 3rd Millennium" 17 - 19 July 2003. pp. 79-88.
  90. Hadi, MNS (2002). Optimum Design of Reinforced Concrete Structures Using Neural Networks. Applied Mechanics and Progress. Proceedings of The Third Australasian Congress on Applied Mechanics, ACAM 2002, 20th - 22nd February 2002, Sydney, Australia. World Scientific. ISBN. 981-02-4867-9. pp. 569-574.
  91. Alvani, K.S. and Hadi, MNS (2002). Discrete Optimization of Truss Structures with Geometrically Non-Linear Behaviour Using Genetic Algorithms, pplied Mechanics and Progress. Proceedings of The Third Australasian Congress on Applied Mechanics, ACAM 2002, 20th - 22nd February 2002, Sydney, Australia. World Scientific. ISBN. 981-02-4867-9. pp. 575-580.
  92. Arfiadi, Y. and Hadi, MNS (2002). Development of Matrix Method Based Structural Analysis Toolbox in Matlab. The Sixth International Conference on Computational Structures Technology. Czech Technical University in Prague, Czech Republic, from 4 to 6 September 2002. Editors BHV Topping and Z. Bittmar, Civil-Comp. ISBN 0-948749-83-0 Paper 4. 13 Pages.
  93. Hadi, MNS and Arfiadi, Y (2002). Optimum Design and Performance of Multi Tuned Mass Damper Systems. The Sixth International Conference on Computational Structures Technology. Czech Technical University in Prague, Czech Republic, from 4 to 6 September 2002. Editors BHV Topping and Z. Bittmar, Civil-Comp. ISBN 0-948749-83-0 Paper 42. 14 Pages. No. Cited = 1
  94. Hadi, MNS and Schmidt, LC. (2002). Enhancing the properties of reinforced concrete beams by using helical reinforcement. Concrete for Extreme Conditions, Proceedings of the International Congress - Challenges of Concrete Construction, Edited by RK Dhir, MJ McCarthy and MD Newlands. Thomas Telford. University of Dundee 5-11 September 2002. pp. 727-736.
  95. Hadi, MNS and Alvani, KS (2002). Discrete Optimisation of Trusses Based on Geometrically Non-Linear Analysis Using Genetic Algorithms. ACE 2002, Advances in Civil Engineering, Fifth International Congress, Istanbul Technical University, Istanbul, Turkey. Editors: S. Pala and A Ilki. ISBN 975-561-222-X. 25-27 September 2002. pp. 399-405.
  96. Hadi, MNS (2002). The Behaviour of High Strength Concrete Columns Reinforced with High Strength Steel. ACE 2002, Advances in Civil Engineering, Fifth International Congress, Istanbul Technical University, Istanbul, Turkey. Editors: S. Pala and A Ilki. ISBN 975-561-222-X. 25-27 September 2002. pp. 527-536.
  97. Hadi, MNS and Schmidt, LC. (2002). High Strength Concrete Columns Reinforced with High Strength Steel. The 6th International Conference on Concrete Technology for Developing Countries. Editor: M. Resheidat, Al-Balqa’ Applied University, ISBN 9957-31-002-X. 21-24 October 2002. volume 2, pp. 753-762.
  98. Hadi, MNS and Schmidt, LC. (2002). Effect of Helical Reinforcement on The Behaviour of Reinforced Concrete Beams. The 6th International Conference on Concrete Technology for Developing Countries. Editor: M. Resheidat, Al-Balqa’ Applied University, ISBN 9957-31-002-X. 21-24 October 2002. volume 3, pp. 783-790.
  99. Hadi, MNS (2001). Behaviour of High Strength Concrete Columns Confined with Helices. ACUN–3 International Composites Conference Technology Convergence in Composites Applications. Editors Sri Bandyopadhyay, N Gowripalan and N Drayton, ISBN 0 7334 0791 9, University of New South Wales, Sydney, Australia, 6 – 9 February, 2001. pp.117-123.
  100. Hadi, MNS and Bodhinayake, BC (2001). A Study on the Effect of Static and Cyclic Loading in the Analysis of Flexible Pavements. The Second International Conference on Mechanics of Structures, Materials and Systems, MSMS 2001. Editors MNS Hadi, LC Schmidt and A Basu, ISBN 0 86418 656 8, University of Wollongong, Wollongong, 14-16 February, pp. 199-204.
  101. Hadi, MNS (2001). Investigation of the Bond of High Strength Concrete with High Strength Steel . The Second International Conference on Mechanics of Structures, Materials and Systems, MSMS 2001. Editors MNS Hadi, LC Schmidt and A Basu, ISBN 0 86418 656 8, University of Wollongong, Wollongong, 14-16 February, pp. 117-122.
  102. Hadi, MNS (2001). Neural Network Applications in Concrete Structures . The Second International Conference on Mechanics of Structures, Materials and Systems, MSMS 2001. Editors MNS Hadi, LC Schmidt and A Basu, ISBN 0 86418 656 8, University of Wollongong, Wollongong, 14-16 February, pp. 81-86.
  103. Hadi, MNS. (2001). Bond of High Strength Concrete with High Strength Steel . Australasian Structural Engineering Conference (ASEC), incorporating the Fifth International Kerensky Conference of the Institution of Structural Engineers, UK. The Structural College of the Institution of Engineers, Australia and the Structural Engineering Society of New Zealand, Gold Coast, Vol. 2, pp. 399-405.
  104. Hadi, MNS. (2001). Optimisation of the Design of Reinforced Concrete Continuous Beams by Genetic Algorithms . Australasian Structural Engineering Conference (ASEC), incorporating the Fifth International Kerensky Conference of the Institution of Structural Engineers, UK. The Structural College of the Institution of Engineers, Australia and the Structural Engineering Society of New Zealand, Gold Coast, Vol. 2, pp. 407-413.
  105. Cooper, P, Arfiadi, Y, Croker, A and Hadi, MNS (2001). Transient Heat Transfer in Buried Pipelines During Hydrostatic Testing. CHT01 - Advances in Computational Heat transfer II - QLD May, publ. Begell House, ISBN 1-56700-158-0, vol. 1, pp 341-348.
  106. Hadi, MNS and Al-samaraie, NH (2001). Behaviour of Confined High Strength Concrete. Concrete Under Severe Conditions - Environment and Loading, Proceedings of the Third Intl. Conf. on Concrete under Severe Conditions, CONSEC’01, Editors N. Banthia, K. Sakai and O.E. Gjorv, ISBN 0-88865-782-X, University of British Columbia, Vancouver, BC, Canada, 18-20 June, Vol. 1, pp. 877-884.
  107. Hadi, MNS and Schmidt, LC (2001). Helically Confined Reinforced Concrete Beams. 2001Second International Conference on Engineering Materials, Editors: Shigeyoshi Nagataki, Akthem Al-Manaseer and Kenji Sakata, Japan Society of Civil Engineers (JSCE) and Canadian Society for Civil Engineering (CSCE), ISBN 1-894662-00-8, San Jose, California, USA August 16-19. Vol. 1, pp. 369-376.
  108. Hadi, MNS (2001). High Strength Concrete Columns Reinforced with High Strength Steel. 2001 Second International Conference on Engineering Materials, Editors: Shigeyoshi Nagataki, Akthem Al-Manaseer and Kenji Sakata, Japan Society of Civil Engineers (JSCE) and Canadian Society for Civil Engineering (CSCE), ISBN 1-894662-00-8, San Jose, California, USA August 16-19. Vol. 1, pp. 673-682.
  109. Hadi, MNS (2001). Optimum Design of Continuous Beams. Advances in Computational Engineering & Sciences, ICES'01. Editors: S.N. Atluri, T. Nishioka and M. Kikuchi. Tech Science Press, 19-26 August 2001; Puerto Vallarta, Mexico. 6 pp.
  110. Hadi, MNS (2001). Using Neural Networks in Reinforced Concrete Design. Advances in Computational Engineering & Sciences, ICES'01. Editors: S.N. Atluri, T. Nishioka and M. Kikuchi. Tech Science Press, 19-26 August 2001; Puerto Vallarta, Mexico. 6 pp.
  111. Hadi, MNS and Arfiadi, Y. (2001). Using genetic algorithm for optimal control force in active vibration control. Advances in Earthquake Engineering – Earthquake Resistant Engineering Structures III. Wessex Institute of Technology, UK & Calpe Institute of Technology, Spain. Editors: C.A. Brebbia and A. Corz. ISBN 1-85312-874-0, ISSN: 1361-617X. Malaga, Spain, 4 - 6 September 2001. pp. 271-280.
  112. Hadi, MNS (2001). Challenges Facing Engineering . New Engineering Competencies – Changing the Paradigm! Proceedings of the SEFI Annual Conference. European Society for Engineering Education. ISBN 2-87352-043-4. Copenhagen 12-14 September. 6 pages.
  113. Hadi, MNS (2001). Optimum Design of Reinforced Concrete Continuous Beams by Genetic Algorithms. Proceedings of The Eighth International Conference on Civil and Structural Engineering Computing. Editor: B.H.V. Topping. ISBN 0-948749-77-6. Paper number 57. Eisenstadt, nr Vienna, Austria. 19-21 September 2001. 11 pages.
  114. Hadi, MNS and Bodhinayake B. C. (2001). A Study on the Effect of Static and Cyclic Loading and Linear and Non-Linear Material Properties in the Analysis of Flexible Pavements by Finite Element Modelling. Proceedings of The Eighth International Conference on Civil and Structural Engineering Computing. Editor: B.H.V. Topping. ISBN 0-948749-77-6. Paper number 74. Eisenstadt, nr Vienna, Austria. 19-21 September 2001. 13 pages. No. Cited = 1
  115. Hadi, MNS and Schmidt, LC (2000). On the Use of Helices for Enhancing the Properties of Reinforced Concrete Beams. The International Composites Conference, ACUN – 2, Composites in the Transportation Industry, Editors Sri Bandyopadhyay, N. Gowripalan, N. Drayton and R. Heslehurst, ISBN 0 7334 0698, NSW, Sydney, Australia 14 – 18 Feb, pp. 143-148.
  116. Arfiadi, Y. and Hadi, MNS (2000). Hybrid Base Isolation-Passive Mass Damper Systems. Computing in Civil and Building Engineering, Proceedings of The 8th International Conference on Computing in Civil and Building Engineering (VIII-ICCCBE), 14-17 August, Stanford University, Editors: Renate Fruchter, Feniosky Pena-Mora and W.M. Kim Roddis, ISBN 0-7844-0513-1, ASCE, Vol. 1, pp. 279-286.
  117. Hadi, MNS and Malik, AA (2000). Designing Flexible Pavements by Finite Elements. Computing in Civil and Building Engineering, Proceedings of The 8th International Conference on Computing in Civil and Building Engineering (VIII-ICCCBE), 14-17 August, Stanford University, Editors: Renate Fruchter, Feniosky Pena-Mora and W.M. Kim Roddis, ISBN 0-7844-0513-1, ASCE, Vol. 2, pp. 1503-1510.
  118. Hadi, MNS, Arfiadi, Y and Kandalaft, R (2000). Optimisation of Rigid Pavement Design By Genetic Algorithm. Advances in Computational Engineering & Sciences, Editors: Satya N. Atluri and Frederick W. Brust, USA, ISBN 0-9657001-3-5, Vol. II, pp. 1604-1609.
  119. Hadi, MNS and Malik, AA (2000). Designing Flexible Pavements by FlexiPave. Advances in Computational Engineering & Sciences, Editors: Satya N. Atluri and Frederick W. Brust, USA, ISBN 0-9657001-3-5, Vol. II, pp. 1568-1573.
  120. Hadi, MNS, Aziz, N.I and Atkins, AS, (2000). New Concepts in Engineering Education to Meet Modern Technological and Economic Challenges- Case Studies from Wollongong and Staffordshire Universities. International Conference on Engineering Education (ICEE 2000) 14 – 18 August, Taipei, Taiwan, ISSN 1562-3580, paper TuA4-2, 5p.
  121. Hadi, MNS and Erskine, JP (2000). Influence of Pavement Rehabilitation on Roughness. 10th Road Engineering Association of Asia and Australasia (REAAA) Conference. Tokyo, Japan 4-9 Sept. 10 pages.
  122. Bodhinayake, BC and Hadi, MNS (2000). Analysis of Flexible Pavements by Finite Element Modelling: A Comparative Study of Numerical Analysis with Field Data. 10th Road Engineering Association of Asia and Australasia (REAAA) Conference. Tokyo, Japan 4-9 Sept. 10 pages.
  123. Hadi, MNS (2000). Optimum Design of Reinforced Concrete T beams by Genetic Algorithms. 4th Asia-Pacific Structural Engineering and Construction Conference: APSEC 2000, September 13-15, Palace of Golden Horses, Kuala Lumpur, Malaysia. Vol. 1, pp. 161-168. No. Cited = 1
  124. Hadi, MNS and Schmidt, LC (2000). Axial Behaviour of High Strength Concrete Columns with High Strength Steel. 4th Asia-Pacific Structural Engineering and Construction Conference: APSEC 2000, September 13-15, Palace of Golden Horses, Kuala Lumpur, Malaysia. Vol. 2, pp. 19-26.
  125. Hadi, MNS and Kandalaft, R (2000). Optimum Design of Reinforced Concrete Beams by Genetic Algorithms . Advances in Civil Engineering, IV. International Conference, 1-3 November 2000 Eastern Mediterranean University, North Cyprus, ISBN 975-97210-0-7. Paper number 302. 10 pages.
  126. Hadi, MNS (2000). Behaviour of Confined High Strength Concrete. Advances in Civil Engineering, IV. International Conference, 1-3 November 2000 Eastern Mediterranean University, North Cyprus, ISBN 975-97210-0-7. Paper number 303. 9 pages.
  127. Hadi, MNS and Schmidt, LC. (2000). Using Genetic Algorithms to Find the Optimum Design of Reinforced Concrete Beams. 2000 Australasian MATLAB User conference. 9-10 November, Melbourne. Published in http://www.ceanet.com.au/mluserconf/papers/Hadi_Schmidt.pdf.
  128. Arfiadi, Y, Hadi, MNS and Schmidt, LC (2000). GA-H2/H ¥ Static Controllers for Buildings during Earthquake. International ICSC Congress on INTELLIGENT SYSTEMS AND APPLICATIONS (ISA'2000), University of Wollongong, December 11-15, 2000, ISBN 3-906454-24-X. Vol. 2, pp. 438-444.
  129. Hadi, MNS and Morris, CE (1999). Extending the Engineering Opportunity Programme at the University of Wollongong . 2nd UICEE Annual Conference on Engineering Education. Published by UNESCO International Centre of Engineering Education (UICEE), Editors ZJ Pudlowski and DQ Nguyen. ISBN 0 7326 2047 3. Auckland Institute of Technology, Auckland, New Zealand, 10 - 13 February, 1999, pp. 206-209. No. Cited = 1
  130. Hadi, MNS, Malik, AA and Chishti, AS. (1999). Client-Server Applications for On-Line Real-Time and Two-Way Interactive Engineering Education over the Internet . 2nd UICEE Annual Conference on Engineering Education. Auckland, Published by UNESCO International Centre of Engineering Education (UICEE), Editors ZJ Pudlowski and DQ Nguyen. ISBN 0 7326 2047 3. Auckland Institute of Technology, Auckland, New Zealand, 10 - 13 February, 1999, pp. 122-125.
  131. Arfiadi, Y and Hadi, MNS. (1999). Effect of Hybrid Mass Dampers on Three Dimensional Asymmetric Structures . International Conference on Mechanics of Structures, Materials and Systems, MSMS’99. Editors MNS Hadi and LC Schmidt, ISBN 0 86418 588 X, University of Wollongong, Wollongong, 17-19 February, pp. 59-66.
  132. Ozolins, GE, Hamsagr, R, Hadi, MNS and Schmidt, LC. (1999) Ductility of High-Strength Reinforced-Concrete Beams . International Conference on Mechanics of Structures, Materials and Systems, MSMS’99. Editors MNS Hadi and LC Schmidt, ISBN 0 86418 588 X, University of Wollongong, Wollongong, 17-19 February, pp. 169-175.
  133. Das, S and Hadi, MNS. (1999). Lessons Learned from Progressive Collapse of Building Structures . International Conference on Mechanics of Structures, Materials and Systems, MSMS’99. Editors MNS Hadi and LC Schmidt, ISBN 0 86418 588 X, University of Wollongong, Wollongong, 17-19 February, pp. 263-270.
  134. Hadi, MNS and Symons, MG. (1999). Predicting the Behaviour of Recycled Road Pavements . International Conference on Mechanics of Structures, Materials and Systems, MSMS’99. Editors MNS Hadi and LC Schmidt, ISBN 0 86418 588 X, University of Wollongong, Wollongong, 17-19 February, pp. 363-370.
  135. Hadi, MNS, Habtemicael, YT and Khweir, KA. (1999). A New Limiting Subgrade Failure Criterion for the Design of flexible Pavements . International Conference on Mechanics of Structures, Materials and Systems, MSMS’99. Editors MNS Hadi and LC Schmidt, ISBN 0 86418 588 X, University of Wollongong, Wollongong, 17-19 February, pp. 379-386.
  136. Hadi, MNS and Morris, CE (1999). Open Day and Engineering Thesis in the University of Wollongong . 2nd Asia-Pacific Forum on Engineering & Technology Education, Published by UNESCO International Centre of Engineering Education (UICEE), Editor Z.J. Pudlowski, ISBN 0 7326 1784 7. The University of Sydney, Sydney, Australia, 4 - 7 July, pp. 326-330.
  137. Hadi, MNS and Schmidt, LC (1999). Enhancing the Performance of High Strength Concrete Reinforced with High Strength Steel by Using Helical Reinforcement . The 9th BCA Annual Conference on Higher Education and the Concrete Industry, British Cement Association, ISBN 0 72101548 4, Cardiff University, Wales, UK, 8th and 9th July, 1999, pp. 265-273. No. Cited = 3
  138. Hadi, MNS, Aziz, NI, Morris, CE and Atkins, AS (1999). The Opportunity Programme in the University of Wollongong . The 3rd AECEF International Symposium: CIVIL ENGINEERING LEARNING TECHNOLOGY in Cardiff ("CELTic") Cardiff University, Wales, UK, editors R.M. Lloyd and C.J. Moore. Thomas Telford. 8th – 10th September 1999, pp. 229-236.
  139. Hadi, MNS and Arfiadi, Y (1999). Application of Genetic Algorithms for the Optimum Design of Rigid Pavements . The 7th International Conference on Civil & Structural Engineering Computing, Oxford, UK, 12th-15th September, 1999. Optimization and Control in Civil and Structural Engineering, editors B.H.V. Topping and B. Kumar. ISBN 0-948749-62-8. Civil-Comp Press, Edinburgh, pp. 41-46.
  140. Arfiadi, Y and Hadi, MNS (1999). Active Vibration Control Designs of Civil Structures Using Real Coded Genetic Algorithms . The 7th International Conference on Civil & Structural Engineering Computing, Oxford, UK, 12th-15th September, 1999. Optimization and Control in Civil and Structural Engineering, editors B.H.V. Topping and B. Kumar. ISBN 0-948749-62-8. Civil-Comp Press, Edinburgh, pp. 215-222.
  141. Hadi, MNS, Aziz, NI and Morris, CE (1999). Engineering Opportunity Programme at the University of Wollongong . 28th Engineering Education Symposium, 20-24 September, Istanbul Technical University, Istanbul, Turkey. Editors G. Saglamer, A. Melezinek, S. Incecik. ISBN 0724-8873. pp. 242-247.
  142. Aziz, NI, Hadi, MNS, and Morris, CE (1999). Engineering Thesis at the University of Wollongong . 28th Engineering Education Symposium, 20-24 September, Istanbul Technical University, Istanbul, Turkey. Editors G. Saglamer, A. Melezinek, S. Incecik. ISBN 0724-8873. pp. 248-254.
  143. Hadi, MNS (1999). Optimum Design of Rigid Road Pavements Based on Genetic Algorithm . XX1st WORLD ROAD CONGRESS, Kuala Lumpur, MALAYSIA, 3 - 9 October 1999, paper number C07-04.
  144. Hadi, MNS and Schmidt, L.C. (1999). Analysis of Helically Confined Reinforced Concrete Beams . Compumod’s Thirteenth Australasian Users’ Conference. Melbourne, 12-13 October, ISBN 0 646 37100 2, pages 11.1-11.11.
  145. Hadi, MNS and Bodhinayake, B.C. (1999). Analysis of Flexible Pavements by Finite Element Modelling: A Comparative Study . Compumod’s Thirteenth Australasian Users’ Conference. Melbourne, 12-13 October, ISBN 0 646 37100 2, pages 34.1-34.12.
  146. Hadi, MNS and Schmidt, LC (1999). Using Helices to Enhance the Performance of High Strength Concrete Beams . Proceedings of the 16th Australasian Conference on Mechanics of Structures and Materials, Editors M.A. Bradford, R.Q. Bridge and S.J. Foster, ISBN 90 5809 107 4, A.A. Balkema/Rotterdam/Brookfield, Sydney 8-10 December, pp. 169-174.
  147. Hadi, MNS and Arfiadi, Y (1999). Optimum Rigid Road Pavement Design Using Genetic Algorithm . Proceedings of the 16th Australasian Conference on Mechanics of Structures and Materials, Editors M.A. Bradford, R.Q. Bridge and S.J. Foster, ISBN 90 5809 107 4, A.A. Balkema/Rotterdam/Brookfield, Sydney 8-10 December, pp. 747-752.
  148. Hadi, MNS and Arfiadi, Y (1999). Real Coded Genetic Algorithms for Active Control Force Optimisation . Proceedings of the 16th Australasian Conference on Mechanics of Structures and Materials, Editors M.A. Bradford, R.Q. Bridge and S.J. Foster, ISBN 90 5809 107 4, A.A. Balkema/Rotterdam/Brookfield, Sydney 8-10 December, pp. 711-716.
  149. Arfiadi, Y and Hadi, MNS (1999). Seismic Response of Three Dimensional Asymmetric Buildings . Proceedings of the 16th Australasian Conference on Mechanics of Structures and Materials, Editors M.A. Bradford, R.Q. Bridge and S.J. Foster, ISBN 90 5809 107 4, A.A. Balkema/Rotterdam/Brookfield, Sydney 8-10 December, pp.545-550.
  150. Malik, AA and Hadi, MNS (1998). FlexiPave: A Program for the Structural Analysis of Flexible and Recycled Pavements. Second International Conference on Environmental Management (ICEM2). Eds. Sivakumar and Chowdhury, Published by Pergamon, Wollongong, 10-13 February, Vol. 2, pp. 1195-1201.
  151. Hadi, MNS (1998). Cost Optimum Design of Rigid Road Pavements . 19th Australian Road Research Board Conference, (ARRB) , Sydney, 6-11 December. pp. 295-309. No. Cited = 3
  152. Arfiadi, Y and Hadi, MNS (1998). On the Use of Genetic Algorithm for Optimal Control Force in Active Vibration Control. Australasian Conference on Structural Optimisation (ACSO’98). Eds. Steven, Querin, Guan and Xie, Published by Oxbridge, Sydney 11-13 February, pp. 207-214.
  153. Hadi, MNS and Arfiadi, Y (1998). Cost Optimum Design of Reinforced Concrete Structures. Australasian Conference on Structural Optimisation (ACSO’98). Eds. Steven, Querin, Guan and Xie, Published by Oxbridge, Sydney 11-13 February, pp. 343-350.
  154. Hadi, MNS and Malik, AA (1998). Using Flexipave for the Analysis of Road Pavements. 9th Road Engineering Association of Asia and Australasia (REAAA) Conference. Transit New Zealand, Wellington, New Zealand 3-8 May, Vol.2, pp. 434-439.
  155. Hadi, MNS (1998). Analysis of Recycled Road Pavements. 9th Road Engineering Association of Asia and Australasia (REAAA) Conference. Transit New Zealand, Wellington, New Zealand 3-8 May, Vol. 2, pp. 469-474.
  156. Hadi, MNS and Malik, AA (1998). Flexipave: a Finite Element Based Program for the Analysis of Flexible Pavements . Fifth International Conference on the Bearing Capacity of Roads and Airfields, (BCRA’98). Eds. Rasmus S. Nordal and Geir Refsdal. Norwegian University of Science and Technology, Trondheim, Norway, 6-8 July, Vol, 1, pp.579-588.
  157. Hadi, MNS and Zarghampour, HR (1998). Non Linear Finite Element Analysis of Recycled Road Pavements . Fifth International Conference on the Bearing Capacity of Roads and Airfields, (BCRA’98). Eds. Rasmus S. Nordal and Geir Refsdal. Norwegian University of Science and Technology, Trondheim, Norway, 6-8 July, Vol. 1, 599-608.
  158. Hadi, MNS (1998). Computer Programs in Teaching Structural Analysis . 4th International Conference on Computer Aided Learning and Instruction in Science and Engineering (CALISCE’98). Ed. C.Alveg à rd. Chalmers University of Technology, Goteborg, Sweden, 15-17 June, pp. 88-94.
  159. Hadi, MNS and Arfiadi, Y (1998). Genetic Algorithm in Active Control of Civil Engineering Structures. Recent Advances in Soft Computing’98. Ed. R.I. John. Centre of Computational Intelligence, De Montfort University, Leicester, UK, 2-3 July, Vol. 1, pp.187-205.
  160. Hadi, MNS (1998). Use of Computer Programs in Teaching Structural Analysis. Overview. Vol. 5, No.1, pp. 44-49.
  161. Hadi, MNS and Arfiadi, Y (1998), Design of Multi-Tuned-Mass-Damper for Seismically Excited Building Using GA-H2 Control. Australasian Structural Engineering Conference, ASEC, Ed. J.W. Butterworth, The Structural Engineering Society of New Zealand, Auckland, New Zealand, 30 Sept. – 2 Oct. Vol. 1, pp. 25-32.
  162. Arfiadi, Y and Hadi, MNS (1998). H2 and H ¥ Control of Seismically Excited AMD-Building with General Output Feedback and Regulated Vectors. Australasian Structural Engineering Conference, ASEC, Ed. J.W. Butterworth, The Structural Engineering Society of New Zealand, Auckland, New Zealand, 30 Sept. – 2 Oct. Vol. 1, pp. 17-24.
  163. Hadi, MNS and Symons, MG (1998). Using Drucker-Prager Model for the Analysis of Recycled Road Pavements . Compumod’s Twelfth Australasian Users Conference. New South Wales, 15-16 October. Paper number 21, 10 pages.
  164. Hadi, MNS and Malik, AA (1998). Towards Making Finite Element Programs More Accessible to Pavement Engineers . Compumod’s Twelfth Australasian Users Conference. New South Wales, 15-16 October. Paper number 19, 10 pages.
  165. Malik, AA. and Hadi, MNS (1997). ROADPRE: A Pre- and Post-Processor for the Analysis of Road Pavements Using STRAND6. The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII). Eds. Choi, Yun and Kwak, Korea Advanced Institute of Science & Technology, KAIST, Seoul, 19-21 August. Vol. 3, pp 1959-1964.
  166. Hadi, MNS, Morris, CE, and Uy, B (1997). Improving the Seminar Presentation System for Final Year Thesis Students. Overview, University of Wollongong. Vol. 4, No. 1, pp.47-53. No. Cited = 1
  167. Hadi, MNS and Doh, JH (1997). Using Computer Spreadsheets for the Cost Optimum Design of Reinforced Structures. The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII). Eds. Choi, Yun and Kwak, Korea Advanced Institute of Science & Technology, KAIST, Seoul, 19-21 August. Vol.2, pp 939- 944.
  168. Hadi, MNS (1997). Computer Aided Design of Cold Formed Steel Structures. The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII). Eds. Choi, Yun and Kwak, Korea Advanced Institute of Science & Technology, KAIST, Seoul, 19-21 August. pp. Vol.1, 721-726.
  169. Doh, JH, Hadi, MNS and Kim, JW (1997). Evaluating the Theoretical Approaches for the Analysis of RC Beams. The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII). Eds. Choi, Yun and Kwak, Korea Advanced Institute of Science & Technology, KAIST, Seoul, 19-21 August. Vol.2, pp 861-866.
  170. Das, S. and Hadi, MNS (1997). Post-yielding and Post-cracking Analysis of Reinforced Concrete Beams by the Finite Element Method. Second China-Australia Symposium on Computational Mechanics (CASCM’97). Eds. Valliappan and Khalili, Australian Association for Computational Mechanics and Chinese Association for Computational Mechanics, Sydney, 12-14 February. pp. 51-60.
  171. Hadi, MNS, Zarghampour, HR, and Symons, MG. (1996). Nonlinear Analysis of Recycled Road Pavements. National Symposium on the Use of Recycled Materials in Engineering Construction. Sydney, 30-31 May. pp. 30-35.
  172. Das, S. and Hadi, MNS (1996). Use of Spreadsheets in Cost-optimum Design of Structures. Australian Engineering Mathematics Conference’96 - An International Conference. Eds. Yuen, Broadbridge and Steiner, IEaust, Sydney, 15-17 July. pp. 631-635.
  173. Das, S. and Hadi, MNS (1996). Non-linear Finite Element Analyses of Reinforced Concrete Beams. APCOM’96 The Third Asian-Pacific Conference on Computational Mechanics. Eds. Choi, Yun and Lee, Seoul, 16-18 September. Vol.2, pp. 1535-1540.
  174. Das, S and Hadi, MNS (1996). Nonlinear Finite Element Analysis of Reinforced Concrete Members Using MSC/NASTRAN. 1996 MSC World User’s Conference. California, 3-7 June, Paper No. 42, 9 pp.
  175. Abeysinghe, NA, Dharmappa, HB, and Hadi, MNS (1996). Development of a Tool for Cost Estimation of Water Treatment Plants. Water Tech. Sydney, 27-28 May. pp. 628-632.
  176. Doh, H, Khokhar, Z, and Hadi, MNS (1996). Experimental and Numerical Analysis of Reinforced Concrete Beams. APCOM’96 The Third Asian-Pacific Conference on Computational Mechanics. Eds. Choi, Yun and Lee, Seoul, 16-18 September. Vol. 2, pp. 1329-1334.
  177. Hadi, MNS (1996). Utilising the Capabilities of Spreadsheets in Engineering Design. Australian Engineering Mathematics Conference’96 - An International Conference. Eds. Yuen, Broadbridge and Steiner, IEaust, Sydney, 15-17 July. pp. 625-630.
  178. Hadi, MNS, Morris, CE, and Uy, B (1996). Final Year Engineering Thesis Presentation. 8th AAEE Annual Convention and Conference. Eds. Morrison and Pudlowski, The University of New South Wales, Sydney, 15-18 December. pp. 104-107. No. Cited = 1
  179. Hadi, MNS (1995). Use of the World Wide Web in Engineering Education. 1995 International Congress of Engineering Deans & Industry Leaders. Eds. Pudlowski and Darvall, Monash University Engineering Education Series, Melbourne, July 3-6. pp. 217-222.
  180. Hadi, MNS (1995). Non-linear Analysis of Reinforced Concrete Beams. Fourteenth Australasian Conference on the Mechanics of Structures and Materials. Eds Beasely, Foster and Melerski, University of Tasmania, Hobart, 11-13 December. Vol. 2, pp. 626-629.
  181. Hadi, MNS (1994). Use of Computers in Civil Engineering Education. 6th Annual Convention and Conference of the Australian Association for Engineering Education. Eds. Parr and Johnston, University of Technology, Sydney, 11-14 December. pp. 728-733.
  182. Hadi, MNS and Symons, MG (1994). Induced Stresses in Road Pavements Due to Vehicular Loading. Compumod's Eighth Australian Conference, Design Plus Analysis. Melbourne, 16- 17 November, Paper No. 17, 10 pp.

Others

  • Hadi, MNS (2010). Reinforcing the Cover of Concrete Columns with Steel Fibres. Concrete in Australia. Vol. 36, No. 1, pp. 45-50.
  • Hadi, MNS (2006). Behaviour of FRP Wrapped Concrete Columns under Eccentric Loading. Concrete in Australia. Vol. 32, No. 3, pp. 38-40.
  • Hadi, MNS (2001). Behaviour of high strength concrete columns confined with helices. Concrete in Australia Vol.27 No.2 June-August 2001 pp.10-13.  
Reports  
  1. Hadi, MNS (2008). Report on Testing 3 Plastic Slab Specimens. University of Wollongong. 3 pages.
  2. Hadi, MNS (2006). Report on Testing 10 Timber Specimens. University of Wollongong. 3 pages.
  3. Hadi, MNS (2003). Report on Testing Scaffolds. University of Wollongong. 22 pages.
  4. Hadi, MNS (2002). Report on Timber Testing. University of Wollongong. 13 pages.
  5. Hadi, MNS (2002). Report on 39 Timber Specimens Testing. University of Wollongong. 13 pages.
  6. Hadi, MNS (2001). Report on Computer Modelling of Reinforced Road Pavements. University of Wollongong. 10 pages.
  7. Hadi, MNS (2001). Report on Timber Pallet Testing. University of Wollongong. 9 pages.
  8. Hadi, MNS (2001). Report on Pavers Testing. University of Wollongong. 3 pages.
  9. Hadi, MNS (2001). Report on Panel Plate Testing. University of Wollongong. 3 pages.
  10. Hadi, MNS (2000). Report on Timber Testing. University of Wollongong. 34 pages.
  11. Hadi, MNS (2000). Report on Site Visit at Kanahooka. University of Wollongong. 9 pages.
  12. Hadi, MNS (2000). Report on Pallet Testing. University of Wollongong. 23 pp.
  13. Hadi, MNS (2000). Training Transport to a Chinese Delegate – Life Cycle Cost Analysis . University of Wollongong. 37 pp.
  14. Hadi, MNS (2000). Training Transport to a Chinese Delegate – Traffic Engineering System . University of Wollongong. 53 pp.
  15. Hadi, MNS (2000). Training Transport to a Chinese Delegate – Pavement Design System . University of Wollongong. 100 pp.
View: 5826 Time(s)   |   Print: 1065 Time(s)   |   Email: 144 Time(s)   |   0 Comment(s)



Write the security code in the box    

© 2015 All Rights Reserved | Iran University of Science & Technology

Designed & Developed by : Yektaweb