CV M. Yaghoubi

Mahmood Yaghoubi

AWT IMAGE

Date of birth

10.17.1945

 

Position

Professor

Program area

Mechanical Engineering

Phone

0098-71-672060                     Fax: 0098-71-301672

E-mail

yaghoubi AT shirazu.ac.ir

Department

Ph.D.

Mechanical Engineering

Purdue University

USA

1978

M.Sc.

Mechanical Engineering

hiraz University

Shiraz, Iran

1971

B.Sc.

Mechanical Engineering

Shiraz University

Shiraz, Iran

1969


  • 1971-1973 Laboratory Instructor, Technical School of Electronic, Shiraz University, Iran.
  • 1973-1975 Instructor, Department of Mechanical Engineering, Shiraz University, Iran.
  • 1978-1985 Assistant Professor, Department of Mechanical Engineering, Shiraz University, Iran.
  • 1985-1986 Associate Professor, Department of Mechanical Engineering, Shiraz University, Iran.
  • 1986-1987 Visiting Professor, Institute de Fisica, Tecnica, Universita de Palermo, Italy, Grant Awarded by Int.
    Center for Theoretical Physics.
  • 1987-1991 Associate Professor, Engineering School, Shiraz University, Iran.
  • 1991-1993 Professor, Engineering School, Shiraz University, Iran.
  • 1993-1994 Visiting Professor, Colorado State University, Colorado, USA.
  • 1994. Professor, Engineering School, Shiraz University Shiraz, Iran.

Research Areas

  • Convection Heat Transfer Energy, exergy analysis, Computational Heat Transfer,Solar Energy
List of Publications

Books

  1. Yaghoubi, M. A. Fundamentals of Heat and Mass Transfer by Convection, Shiraz University Press, 1990.
  2. Yaghoubi, M.A. Editor,  Proceedings on the International Congress on Computational Methods In Engineering, 5 Volumes, Shiraz IRAN, May 1993.
  3. Bahadori, M.N. and Yaghoubi M., Ventilation and Natural Cooling in Traditional Buildings, Markaz Nasher Daneshgahi, 2007.

Papers

  1. Satter, M.A. and Yaghoubi. M.A. Free and Forced Vibrations of a Simply Supported Pipe Carrying Flowing Fluid, The Journal of the Industrial Mathematics Society, Vol.25, pp. 53-66,1975.
  2. Yaghoubi, M.A. and Manvi, R. Thermal Stresses in Transient Cooling of a Heat Generating Sphere, Nuclear Engineering and Design, No, 53, pp. 381-386. 1975.
  3. Incropera, F.P. and Yaghoubi, M.A.  Free Convection Heat Transfer from Heated Cylinder Immersed in a Shallow Water Layer, Journal of Heat Transfer ASME Trans. Vol. 101,pp.743-745, 1979.
  4. Incropera F.P. and Yaghoubi M.A.  Buoyancy Driven Flows Originating from Heated Cylinders Submerged in a Finite Water Layer, Int. J. Heat and Mass Transfer, Vol. 3, pp.315-330, 1980.
  5. Yaghoubi, M.A. and F.P. Incropera “Analysis of Natural Convection Due to Localized Heating in a Shallow Water Layer”, Numerical Heat Transfer, Vol. 3, pp. 315-330, 1980.
  6. Yaghoubi , M.A., “Flow Visualization Above Heated Horizontal Cylinders in a Shallow Water Layer”, Journal of the Flow Visualization Society of Japan, Vol. 2, No. 6, pp. 559-564, 1982.
  7. Yaghoubi, M., Prediction of Energy Demand 1360-1380 (2001) in Fars Province, J. of Engineering School, Mashhad Univ., Vol. 1, No. 1, 59-75 (in Persian) 1984.
  8. Yaghoubi ,M.A., Yearly Performances of Solar Stills, Energy, Vol. 2,No. 2 (in Persian), 1984.
  9. Yaghoubi, M.A. and A.A. Golneshan, Passive Cooling of an Underground Room (Sardab), Iranian J. of Science and Technology, Vol. 10, No. 1, pp. 89-98, 1985.
  10. Yaghoubi, M.A. and A. Sabzevari, Simulation of Passive Solar Building, Modeling, Simulation & Control, C, Vol. 8, No. 3, 1987.
    Yaghoubi, M.A. and A. Sabzevari, Studies on Simulation of Passive Solar Buildings, J. Solar & Wind Technology, Vol. 4, No.3, pp.337-346, 1987.
  11. Butera, F.M., G. Cannistarao, M.A. Yaghoubi, and A. Lauritano, Benesser Thermico e Ventilazione Naturale negle Edifici, Energie Alternative Habitate Territorio Energia, Anno 11, No. 59, pp. 183-189, 1989.
  12. Jafarpor, Kh. and M.A. Yaghoubi, Solar Radiation for Shiraz, Iran, J. Solar & Wind Technology Vol.6, No.2, pp. 177-179,1989.
  13. Golneshan A.A. and M.A. Yaghoubi, Simulation of Ventilation Strategies of a Residential Building in Hot Arid Regions of Iran, Energy and Buildings, Vol.14, pp.201-205,1990.
  14. Yaghoubi,M.A. and Kh. Jafarpor, Global Solar Radiation for Fars Province, Iran, Iranian J. of Science and Technology,Vol.14, No.1, pp.47-62, 1990.
  15. Yaghoubi, M.A., Air Flow Pattern Around Domed Roof Buildings, Renewable Energy,Vol.1, No.3/4, pp.345-350, 1991.
  16. Yaghoubi, M.A., A. Sabzevari, A.A. Golneshan, Wind Towers; an experimental study, Solar Energy, Vol. 47, No.2, pp. 97-106,1991.
  17. Karimi, G., M. Taheri and M.A. Yaghoubi, A Numerical Modeling for Natural Convection Heat Transfer in Porous Media with Generated Internal Heat Sources, Iranian J. of Engineering, Vol.4,No.3&4,pp.115-125, 1991.
  18. Butera, F., G. Cannistraro, G. Rizzo, and M.A. Yaghoubi, Simplified Thermal Analysis of Naturally Ventilated Dwellings, Renewable Energy, Vol.1, No. 5/6, pp. 749-756, 1991.
  19. Yaghoubi, M.A., G. Karimi, A.A. Karimi, A Boundary Element Modeling for Two-Dimensional Transient Heat Conduction, Nuclear Engineering and Design, Vol. 135 pp.227-285, 1992.
  20. Sabzevari, A. and M.A. Yaghoubi, Airflow Behavior In and Around Domed Roof Buildings, Wind Engineering, Vol. 16, No. 1, pp. 26-33, 1992.
  21. Kazeminejad, H., Yaghoubi, M.A. and Bahri, F., Conjugate Forced Convection-Conduction Analysis of The Performance of a Cooling and Dehumidifying Vertical Rectangular Fin, Int. Journal Heat and Mass Transfer, Vol. 36, No. 14, 3625-3631, 1993.
  22. Yaghoubi, M.A., H. Kazeminejad and Farshidiyanfar, A. , Heat and Mass Transfer with Dehumidification in Laminar Boundary Layer Flow Along a Flat Plate, Journal of Heat Transfer, ASME Transaction, Vol. 115, pp.785-788, 1993.
  23. Kazeminejad, H., Yaghoubi,M.A. and Sephri, M. , Effect of Dehumidification of Air on the Performance of Eccentric Circular Fins, Proceedings of the Institute of Mechanical Engineers Vol. 207, pp. 141-146, 1993.
  24. Yaghoubi, M.A. and A. Sabzevari, Solar Radiation in Shiraz: A Comparative Study of Two Periods, International Journal of Renewable Energy, Vol. 3,No.6/7, pp.725-729, 1993.
  25. Yaghoubi M.A. The Program of Aerospace Engineering Education in Some of the Developed Countries, Sharif Monthly Publication in Science and Research, Vol. 9, No.3, pp.42-49, 1372 (1993) in Persian.
  26. Kazeminejad H., M. Ghamari, and M.A. Yaghoubi, Leading Edge Separation From a Blunt Plate at Low Reynolds Number; a Numerical Study, Iranian J. of Science and Technology, Vol. 17, No. 2, pp. 105-116, 1993.
  27. Shafie S., M. Taheri, M.A. Yaghoubi, A Case Study of Energy Saving for Cooling and Heating of Buildings, Iranian Journal of Science and Technology, Vol. 19, No.4, 333-346, 1995.
  28. Kazeminejad, H. M. Ghamari, and M.A. Yaghoubi, A Numerical Study of Convective Heat Transfer from a Blunt Plate at Low Reynolds Number, International Journal of Heat and Mass Transfer, Vol. 39, No. 1, 125-133, 1966.
  29. Yaghoubi, M.A., and Jahanara, M., Two Dimensional Numerical Simulation of Wind Flow and Ventilation in A Single Building Turbulence Model, Iranian Journal of Science and Technology. Vol. 20, pp.73-93, 1996.
  30. Yaghoubi, M.A., Divisions and Branches in Mechanical Engineering, J. Mechanical Engineers, Iranian Society of Mechanical Engineers, 1998 (in Persian).
  31. Yaghoubi, M., A. Kirkpatrick, and K. Knappmiler, Numerical Prediction of Contaminant Transport and Indoor Air Quality in a Ventilated Office Space, J. Particulate Science Technology, Vol.13, No. 2, PP.117-131, 1995.
  32. Yaghoubi, M., and A. Sabzevarri, Calculation of Hourly Output of a Solar Still for Various Cities of Iran, Renewable Energy, An International Journal, Vol. 7, No. 4, 427-435, 1996.
  33. Yaghoubi, M., Sabzevari, A., Further Data on Solar Radiation for Shiraz, Iran, Renewable Energy, an Int. J., Vol. 7, No. 4, 343-344, 1996.
  34. Yaghoubi, M., K. Knappmiler, and A. Kerkpatrick, Ashrae Transaction, Vol.115, 1031-1040, 1995.
  35. Yaghoubi, M. and P. Davvami, A Study on Engineering Education, Name-ye Farhangestan-e Ulum, No.3, Vol.3, pp.85-102, 1996.
  36. Eslami, M.R., Esmailzadeh, E., Yaghoubi, M., Sohrabpour, S., Molki, M., Sayyadi, A., The Role of Engineering Societies in Countries Progress, Nameh-Farhangestan, Vol. 2, No. 2, 1996.
  37. Rahnema, M. and Yaghoubi, M., A Numerical Study of Turbulent Flow Around a Series of Parallel blunt Plates, Scientia Iranica, Vol. 3, No. 3, 9-20, 1996.
  38. Rahnema, M. Yaghoubi, M., and Sabzevari A., Turbulent Wind Flow Patterns and Pressure Fields Across a Tall Rectangular Building, Journal of Wind Engineering, Vol. 20, No. 4, 241-257, 1966.
  39. Rahnema, M., M. Yaghoubi, and H. Kazeminejad, A Numerical Study of Convective Heat Transfer from an Array of Blunt Plates, Int. J. of Heat and Fluid Flow, Vol. 18, No. 4, 430-436, 1997.
  40. Yaghoubi, M. and Dorrodgar, F., Design of a Parabolic Trough Collector for a 250 kW Solar Thermal Power Plant, J. of Energy of Iran, No. 1, 54-62, (in Persian).
  41. Mehryar, R. and Yaghoubi, M., Design Selection of 250 Solar Thermal Power Plant Cycle, J. of Energy of Iran, No. 2, 15-26, 1997, (in Persian).
  42. Yaghoubi, M., Zamankhan, P., and A. Sabzevari, Numerical Analysis of Two-Dimensional Wind Flow in and Around Rectangular Buildings Part I: Modeling and Simulation, Wind Engineering, Vol. 22, No.2, 1998.
  43. Yaghoubi, M., Zamankhan, P., and A., Sabzevari, Numerical Analysis of Two-Dimensional Wind Flow in and Around Rectangular Buildings, Part II:Flow Field and Ventilation, Wind Engineering, Vol. 22, No.2, 1998.
  44. Yaghoubi, M., and Atashkadi, P., Analysis of Dynamic Forces for Unsteady Laminar Flow Around a Rectangle, ISME Journal No.2, pp.57-67, (in Persian) 1999.
  45. Yaghoubi, M., and M., Rahnama, Numerical Study of Turbulent Flow and Heat Transfer from an Array of Thick Plates, International Journal of Thermal Sciences, Vol. 21, No. 2000.
  46. Yaghoubi, M., Non-conventional Training in Engineering Education, J. Iranian Engineering Education, Academy of Sciences, I.R. Vol. 1. No.1, Iran ,1999.
  47. Yaghoubi, M., et al., A Study of Typical Academy of Sciences Around the Word, Namey-Farangestan Oloom (in Persian), 2002.
  48. Yaghoubi, M. Mehryar, R. and A. Sabzevari, Design and Performance Simulation of a 250 KW Solar Thermal Power Plant for Shiraz, Iran, Iranian J. of Energy (in Persian), Vol. 3, No.6, 1999.
  49. Yaghoubi ,M., Definition of Heat in Science and Engineering, Iranian J. Engineering Education, Vol.1, No..3, 2000.
  50. Nori, P.M., and Yaghoubi, Unsteady State Analysis of 250 KW, Solar Thermal Power Plant in Shiraz, (in Persian), Iranian J. Energy, Vol.4, No.8, 2000.
  51. Yaghoubi, M. and Rahnama, M., Turbulent Heat Transfer around a Finite Thick Plate with Incident Angle, , Accepted for publication in Int. J. Communication in Heat Mass Transfer, Vol.28, No.2, pp267-276, 2001.
  52. Yaghoubi, M., Quality Assurance in Engineering Education, Iranian Journal of Engineering Education, Vol. 2, No.1, pp.1-22, 2000 (in Persian).
  53. Rezvani, A., Karami, Gh and Yaghoubi, M., Thermal Analysis of Tire, Vol. 20., No. 1, J. of Esteghlal, (in Persian ) 2001.
  54. Yaghoubi, M. A History of Heat Transfer, Iranian J. of Engineering Education, Vol. 3, No.1 (in Persian ) 2001.
  55. With Graduate committee of I. R. Academy of Sciences, articles:
    The significance of Engineering PhD programs
    An Investigation to the Engineering PhD Qualifying Exam
    Residency Requirement
    Ph. D Student Admission Procedure
    Journal Publication a Pre0requiste for Ph. D Award
    A study on the PhD Research and Education
    Graduate Research Relation with University..
    Timetable of Engineering PhD Program
    Teaching Quality and Course Credit
    Peculiarity of Ph. D advisor
    Re-evaluation pf Ph. D Program
    Various Engineering PhD Curriculum and Development
  56. In Iranian Journal of Engineering Education, Vol. 3, No.2, (in Persian ) 2001.
  57. Yaghoubi M., Karami, Gh., Taheri M., and Rahemi, Sh., Comparison of PH.D Specification Program in Other Countries, Submitted, Iranian J. of Engineering Education, Vol. 4, No.3, (in Persian ) 2002.
  58. Azizian, K., M. Yaghoubi, and A. Kenray, Design Experiences of the First Solar Parabolic Thermal Power Plant for Various Regions in Iran, Iranian Journal of Energy, Vol. 6, No. 12, (in Persian 2002).
  59. Amniah, H. and M.Yaghoubi, Three-dimensional Laminar Fluid flow and heat Transfer from Array of Finite length Plates, Journal of Mechanical Engineering, ISME, Vol.2, No.5, (in Persian) 2002.
  60. Tabei, M. and Yaghoubi, M., Engineering and Philosophy, Iranian Journal of Engineering Education, Vol.4, No.1, 2002 (in Persian).
  61. Serposhan, S. and Yaghoubi, M., Solar Energy on Three-dimensional Surfaces, Iranian Journal of Energy Vol. 7, No. 13 (in Persian) 2002.
  62. Yaghoubi, A. Kenary, and K. Aziziyan, Solar Thermal Power Plant, Mechanical Engineering Journal ISME, Winter 2002.
  63. Yaghoubi M., Azizian, K.and A. Kenray, Simulation of Shiraz Solar Power Plant for optimal Assessment, Renewable Energy Journal, Vol.28, pp.1985-1998 (2003).
  64. Yaghoubi, M. and M. N. Bahadori, About Engineering Prosperous, part I-Wisdom, Iranian Journal of Engineering Education (in Persian), Vol.5, No.17,, 2003.
  65. Bahadori, M. N, and Yaghoubi M. , About Engineering Prosperous, Part II-Principles, Iranian Journal of Engineering Education , Vol. 5, Number 17 ( in Persian), 2003.
  66. Yaghoubi, M., Aziziyan,K. and Zendehbodi, Solar Radiation Potential in Yasooj, Iranian Journal of Energy, Vol.8, No. 16 (in Persian) 2003.
  67. Yaghoubi, M and Bahadori, M.N., About Engineering Prosperous, Part III-Professional Ethics, Iranian Journal of Engineering Education, Vol. 5, No.18, 2003 (in Persian).
  68. Yaghoubi, M., and Bahadori-nejad, Aziziyan, K., A Coarse of Engineering Ethics for Engineering Students, Iranian Journal of Engineering Education, Vol. 5, No.20, 2004 (in Persian).
  69. Yaghoubi, M., and Bahadori-nejad, Aziziyan, K., Engineers Social Attitude in Industry Iranian Journal of Engineering Education, Vo. 6, No.22, 2004 (in Persian).
  70. Yaghoubi, M. and K. Aziziyan, Annual Performances of Shiraz Solar Thermal Power Plant with Steam Engine, Iranian Journal of Energy, Vol. 8, No.18, 2004 (in Persian).
  71. Yaghoubi, M. and S. Mahmoodi, Experimental Study of Turbulent Separated Flow around Blunt Plates, Int. J. of Experimental Heat Transfer , Thermodynamics And Fluid Mechanics, Vol.29, No.1, pp.105-112, 2004.
  72. Velayati, E. and Yaghoubi, M., A Numerical Study of Turbulent flow around Parallel Bluff Plates, International J. Heat and Fluid Flow, Vol. 26, No. 1, pp.80-91, 2005.
  73. Yaghoubi, M. and Velayati, Undeveloped Convection Heat Transfer From an Array of Cubes in Cross-Stream Direction, International Journal of Thermal Sciences, Vol 44/8 pp 756-765, 2005.
  74. Yaghoubi, M. and Velayati, E., Conjugate Heat Transfer from Surface Mounted Finite Blunt Plates to be appears in The Proceeding of the Mechanical Engineering, Part C, 2005.
  75. Davami, P. Yaghoubi. M., Ghafari, M. M. and Pakpor, M., Foresight for Technology and Science Development, and Available bases for Iran Progresses, Khabar-Nameh Shiraz University, No. 99 , 2005 ( in Peraian).
  76. Zahmatkesh, A, and Yaghoubi, Studies of Thermal Performance of Electrically Heaters by using Porous materials, Int. Communication in Heat and Mass Transfer, 33,259-267, 2006.
  77. Yaghoubi, M. and Azizian, K., Development of Ph.D Engineering Students and Significances of Research Methods, Iranian Journal of Engineering Education, Vol.8, No.29 (in Persian) 2006.
  78. Naeni, N. and M. Yaghoubi, Analysis of Wind Flow Around a Parabolic Collector, (1) Fluid Flow, Renewable Energy, An Int. Journal, Vol. 32, No.11, 1898-1916, 2007.
  79. Naeni, N. and M. Yaghoubi, Analysis of Wind Flow Around a Parabolic Collector, (2) Heat Transfer, Renewable Energy, An Int. Journal, Vol. 32, issue 8, 1259-1272, 2007.
  80. Yaghoubi, M. et al, A comparative study of science and technology development in Iran and some other countries, Iranian Journal of Engineering Education, Vol.31, 2006 (in Peraian).
  81. Yaghoubi M. and M. Ghafari, Conceptual Structure of Science and Technology Policy with Emphasis on Engineering, Iranian Journal of Engineering Education, Vol. 8, No. 32, pp.21- 49, 2007 (in Perasian).
  82. Hadavand M., Yaghoubi, M., Emdad, H., Transient study of combined convection and radiation of vaulted roofs, Submitted to Energy and Environment, 2007.
  83. Diyalameh, J, Yaghoubi M., Aboali, O., Natural convection from an array of horizontal Rectangular thick fins with short length, Applied Thermal Engineering, Volume 28, Issues 17-18, Pages 2371-2379, 2008.
  84. Zeini, J. Eghtesad M. and Yaghoubi, M., Hybrid modeling and supervisory switching control of complete solar power plant, accepted for publication in International Journal of Modeling and Simulation, 2007.
  85. Yaghoubi, M. Mokhtari, A., Feasibility of solar thermal plant in Iran, Accepted for publication in J. Of Energy Management and Planning, 2007 (in Persian).
  86. Hadavand, M. Yaghoubi, M. and H. Emdad, Thermal analysis of vaulted roofs, Energy and Building, Vol. 40, pp.265-275, 2008.
  87. Mohamadi,A., M. Yaghoubi, M. Rashidi, Analysis of local heat transfer in a spark ignition engine, International Communication in Heat and Mass Transfer, 35, pp.215-224, 2008.
  88. Ashjaee, M., A.H. Eshtiaghi, M. Yaghoubi, T. Yousefi, Experimental investigation on free convection from a horizontal cylinder beneath an adiabatic ceiling, Journal of Experimental Thermal and Fluid Science, 32 pp.614-623, 2007.
  89. Hadavand, M., M. Yaghoubi, Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations, Applied Energy Journal, 85, pp.663-679, 2008.
  90. Salamanpour, M., O. Nourani Zonouz and M. Yaghoubi, analysis of frost formation through a two-dimensional duct with turbulent flow, Heat Transfer Research, Vol. 39, No. 4, pp.35-58, 2008.
  91. Tahavvor, A., M. Yaghoubi, Natural cooling of horizontal cylinder using Artificial Neural Network (ANN), Int. Communication Heat Mass Transfer, Volume 35, Issue 9, November 2008, Pages 1196-1203.
  92. Eshtiyaghi, A.H., D. Ehaei, M. Yaghoubi, M. Ashjaee, Free convection from a horizontal array of cylinders beneath an inclined adiabatic ceiling, Heat Transfer Research , in Press.
  93. Yaghoubi, M. and A. Mokhtari, Energy and teaching thermo-economic applications in engineering, Journal of Engineering Education, Vol.34, 2008.
  94. Zeini, J., Eghtesad, M., Yaghoubi,M., Fuzzy Switching Control of the Complete Oil Cycle of Shiraz Solar Power Plant, to be appear in Auto-Soft-Intelligent Automation and Soft Computing Journal, in press 2009.
  95. M. Yaghoubi, M. Ashjaee, A.H. Eshtiaghi, T. Yousefi Thermal study of an array of inline horizontal cylinders below a nearly adiabatic ceiling, Experimental Thermal and Fluid Science, Volume 33, Issue 2, January 2009, Pages 232-239.
  96. Shaeri M.R. and M. Yaghoubi, Kh. Jafarpour,, Heat transfer analysis of lateral perforated fin heat sinks, Applied Energy, 86 (2009) 2019–2029.
  97. Shaeri, M.R. and Yaghoubi, Numerical analysis of turbulent convection heat transfer from 3 an array of perforated fins, International Journal of Heat and Fluid Flow Volume 30, Issue 2, pp.218-228, 2009.
  98. Shaeri, M.R. and Yaghoubi, M., Thermal enhancement from heat sinks by using perforated fins, Energy Conversion and Management , Volume 50, Issue 5, Pages 1149-1400, 2009.
  99. Yaghoubi., M., M.R. Shaeri,, Kh. Jafarpour, Three-dimensional numerical laminar heat transfer around lateral perforated fins, Computational Thermal Sciences, Vol.1, 2009.
  100. Tahavvor, A.R., Yaghoubi, M., Analysis of early stage frost formation in natural convection over a horizontal cylinder , International Journal of Refregiration, in press, 2009.
  101. M. I. Hasan, A.A. Rageb, M. Yaghoubi, H. Homayoni, Influence of channel geometry on the performance of a counter flow microchannel heat exchanger, International Journal of Thermal Sciences, 48, 1607-1618, 2009.
  102. M.Mohammadi, M. Yaghoubi, E. Goshtasbi-rod, Analysis of cooling air jacket and air distributor in a co-current spray dryer, Iranian Journal of Science and Technology, Transaction B: Engineering, Vol.33, No. B5, pp.371-385, 2009.
  103. M.M. Tavakol, M. Yaghoubi, M M. Masoudi Motlagh Air flow aerodynamic on a wall mounted hemisphere for various turbulent boundary layers. In press Experimental Thermal and Fluid Science, pp.538-553, 2010.
  104. A. Mohamadi, M. Yaghoubi, Estimation of instantaneous local heat transfer coefficient in Spark-Ignition Engines, International Journal of Thermal Science, Volume 49, Issue 7, Pages 1309-1317, 2010.
  105. A. Baghernejad, M. Yaghoubi, Exergy Analysis of an Integrated Solar Combined Cycle System, Renewable Energy, An International Journal, 35, 2157-2164, 2010.
  106. H.A. Pakravan, M. Yaghoubi, Combined thermophoresis, Brownian motion and Dufour effects on natural convection of nanofluids, International J. of Thermal Science,Vo. 50, pp.394-402, 2011.
  107. A. Baghernezad, M. Yaghoubi, Multi objective exergoeconomic optimization of an integrated solar combined cycle system using evolutionary algorithms, International Journal of Energy Research, in Press, 2010.
  108. A. Tahavvor, M. Yaghoubi, Experimental and numerical study of frost formation by natural convection over a cold horizontal circular cylinder, Int. J. of Refrigeration, 33, 1444-1458, 2010.
  109. M.M. Tavakol, M. Yaghoubi, Experimental and numerical analysis of turbulent air flow around a surface mounted hemisphere, SCIENTIA IRANICA, Vol.17, No.6, pp.480-491, 2010.
  110. M. Yaghoubi, Responsibility of Professional Ethics in Engineering Education, Iranian Journal of Engineering Education, Vol. 12, No. 46, 2010.
  111. A. Tahavvor, M. Yaghoubi, prediction of frost deposition on a horizontal circular cylinder under natural convection using artificial neural networks, International Journal of Refrigeration, Volume 34, Issue 2, March 2011, Pages 560-566.
  112. A. Baghernejad, M. Yaghoubi, Exergoeconomic Analysis and Optimization of an Integrated Solar Combined Cycle System (ISCCS) Using Genetic Algorithm, Energy Conversion and Management, Vol.52, pp.2193-2209, 2011. 
  1. Yaghoubi, M.A. and Bahadori, M.N.  A Feasibility Study of Wind Energy Utilization in Iran Proceedings of the First Mechanical Engineering Congress pp. 520-531, Shiraz Iran, 1975.
  2. Yaghoubi, M.A. and Incropera, F.P. Natural Convection from a Heat Horizontal Cylinder Submerged in a Shallow Water Layer, Proc. of Sixth International Heat Transfer Conference, Toronto, Canada, 1978.
  3. Yaghoubi, M.A. and A. Sabzevari, Persian Windmills, Proceedings of International Symposium Workshop on Renewable Energy Sources, Lahor, Pakestan, pp. 211-220, March 1983.
  4. Yaghoubi, M.A., Solar Distillation Research in Solar Energy Center, 24th Science Week, Aleppo, Syria, Nov. 1984.
  5. Sabzevari, A. and Yaghoubi, M.A., Alternative Energy Sources of Iran, The State-of-the Art, Proc. 6th Miami International Conf. on Alternative Energy Sources, Miami Beach, pp.433-444. Dec. 1983.
  6. Jafarpor, Kh, Sabzevari, A. and M.A. Yaghoubi, Design of a Flat Plate Solar Cooker for Indoor- Cooling, Proc. of International Days on Heliothermie Transfer, pp.109-116, Tunisie, 1983.
  7. Golneshan, A.A. and M.A. Yaghoubi, Natural Cooling of a Residential Room with Ventilation in Hot Arid Regions, Proc. of World Congress on Heating Ventilating and Air Conditioning, Vol.6, pp.309-314, Copenhagen, Aug. 1985.
  8. Jafarpor, Kh. and M.A. Yaghoubi, Comparison of the Empirical Models with the Measurements to Estimate Solar Radiation for Shiraz, Proc. of the 7th Miame international Conference on Alternative Energy Sources, Miame, pp. 53-55, Dec. 1985.
  9. Butera, F.M., M.A. Yaghoubi and G. Cannistraro, Natural Cooling of Buildings; A Design Tool for Predicting Comfort Conditions, ISES Conference, Homburg, pp. 13-18, Sep. 1987.
  10. Cannistraro,G., A. La Pica, D. Van Hattem, and M.A. Yaghoubi, Validazione Sperimentale Del Modello Di Ventilazione Naturale Native, Al 44 Congress Nazionale A.T.I. di Cosenza, pp.12-15, Italy, Sep. 1989.
  11. Sabzevari, A. and M.A. Yaghoubi, Wind Flow Visualization in and Around Domed Roof Structures, Proc. 9th Miame International Congress on Energy and Environment, Vol.1, pp.90, 1989.
  12. Yaghoubi, M.A. and A. Sabzevari, Wind Induced Ventilation in Domed Roof Buildings, Proc. of Third Int. Iranian Congress of Civil Engineering, Vol. 3 pp.723-731, Shiraz, May 1990.
  13. Yaghoubi M.A., Analysis of Naturally Ventilated Homes for Cooling; Modeling and Simulation, Proc, International AMSE Conference, United Arab Emirates, pp.71-80, 1990.
  14. Yaghoubi, M. A., Gh. Karimi, and M. Taheri, Numerical Modeling of Thermal and Hydrodynamic Structure of an Enclosure with Porous Medium and Internal Heat Generation, Proceedings of 3rd ASME-JSME Thermal Engineering, Joint Confernce, Reno, Vol. 4, pp.245-250, March 1991.
  15. Yaghoubi M.A., H. Kazeminajad, and A. Farshidiyanfar, Laminar Forced Convection Heat Transfer with Dehumidification Along a Cooled Flat Plate, Proceedings of International Conference on Numerical Methods in Laminar and Turbulent Flow, Vol.7, part 1,pp.64-74, Stanford, June 1991.
  16. Kazeminejad, H., M.A. Yaghoubi, and F. Bahri, Dehumidification of Humid Air Flow Over a Vertical Rectangular Fin with Non-uniform Heat Transfer Coefficient, Proccedings of 7th International Conference on Numerical Methods in Thermal Problems, Stanford, June 1991.
  17. Yaghoubi, M.A., and A. A. Karimi, A Boundary Element Modeling for Two-Dimensional Transient Heat Conduction, Proceedings of 11th Int. Conference on Structural Mechanics in Reactor Technology, Vol. B, pp.117-122, August, Tokyo 1991.
  18. Yaghoubi, M.A., Recent Developments in Heat Exchanger Design and Their Classifications, Proceedings of The Seminar of Joint Engineering School and Ministry of Oil, pp.58-97 (in Persian), Shiraz, Iran, 1991.
  19. Yaghoubi, M.A., and G.R. Zandehbodi, Solution of Unsteady Heat Conduction in Axisymmetric Bodies by Finite Element Method, Al-Azhar Engineering Second International Conference, Vol. 7, pp.13-23, Dec. 1991.
  20. Yaghoubi, M.A., G. Karami, and A.A. Karmi, The Use of Boundary Element Method in Transient Heat Conduction, Proceedings of Int. Conference on Engineering Applications of Mechanics, Vol.3. Pp.81-88, 1992.
  21. Yaghoubi, M.A., and M.A. Sattar, Studies Related to Utilization of Photovoltaic Electricity for Remote Area Applications In IRAN, Proceedings of Workshop on Photovoltaic, S/N 17, Libya, June 1991.
  22. Taheri, M., M.A. Yaghoubi, G.Karimi, and M. Monabbati, Optimization of Solar Radiation on Cooling and Heating of Buildings, Third International Conference, on Applications of Solar and Renewable energy, April, 19-22, Cario, 1992.
  23. Taheri, M., M.A. Yaghoubi, M. Monabbati, and G. Karimi, Window Orientation for Reduced Cooling and Heating Load, Proceedings of Renewable Energy Technology and The Environment, Vol. 4, pp.2234-2238, Reading, 1992.
  24. Kochechkzadeh, M., Yaghoubi M.A., Janghorban, K. and A. Dehghan, Numerical Simulation of Continuous Casting Processes, Proceedings of International Congress on Computational Methods in Engineerig, Vol. 2, pp. 287-294, Shiraz, IRAN, May 1993.
  25. Kazeminejad, H., Ghamari, M. and Yaghoubi, M.A., A Numerical Study of Convective Heat Transfer in the Laminar Separated and Reattached Flow over a Blunt Flat Plate, Proceedings of 8th Int. Conf. in laminar and Turbulent Flows, pp.457-467, Swansea, U.K. July, 1993.
  26. Yaghoubi, M.A., Flow Visualizations; from Experiment to Computer, Proceedings of The First Iranian Society of Mechanical Engineering, pp. 118, Tehran, Feb. 1993. (Keynote Speech, In Persian).
  27. Yaghoubi, M.A., Kazeminejad, H. and Shafaf-Zadeh, G.R., Numerical Analysis of Transient Heat Transfer in Nozzles, Proceedings of Computational Methods in Engineering, Vol. 1, pp.729-734, Singapore, 1992.
  28. Yaghoubi, M.A., M. Rahnema, and A. Khorami, Application of Computer in Design of Auto Radiators, Proc. of the 1st Seminar of Industrial Radiators, pp. 14, Tehran, 1993. (In Persian).
  29. Yaghoubi, M.A., M. Rahnema, A. Khorami, A Simple Experimental Method in Evaluating the Performances of Radiators. Proc. of the 1st Seminar of Industrial Radiators, pp. 33, Tehran, 1993. (In Persian).
  30. Kazeminejad, H., M. Gamari, and M.A. Yaghoubi, Leading Edge Separation from a Blunt Plate at Low Reynolds Number: A Numerical Study, Proceedings of International Congress on Computational Methods in Engineering, Vol. 2, pp. 247-253, Shiraz, Iran, May, 1993.
  31. Satter, M.A. and M.A. Yaghoubi, A Study of Energy Options for Electricity Production in Iran, 8th International Power System Conference, pp.528-537, Tehran, Nov. 1993.
  32. Yaghoubi, M.A., K. Knappmiller, and A. Kirkpatrick, Numerical Study of Air Contamination Distribution in a Ventilated Enclosure, Proc. of 25th Annual Meeting of the Fine Particle Society and 1994 Pharmaceutical Science and Technology Conference, NJ, July 1994.
  33. Yaghoubi M.A., R. Mehryar, and A. Dehghan, Computer Simulation of Liqued Metal Flow, Heat Transfer and Solidification in a Duct, Proceedings of The Second Annual ISME Conference, Tehran Iran, May 1994, pp. 286-293. (In Persian).
  34. Khadem, S. A., A. Dehghan, H. Shariat, and M.A. Yaghoubi, Study of Liquid Metal Flow in Evaporative Pattern Casting, Proceedings of The Second Annual ISME Conference, Tehran, Iran, May 1994, pp.294-301. (In Persian).
  35. Rahnema, M. and M.A. Yaghoubi, Numerical Solution of Laminar Flow in a Pipe With Sudden Contraction, Proceedings of Third Conference on Dynamic of Fluid Flows, Tehran, pp. 325-334, Jan. 1995 (in Persian).
  36. Jahanara, M., M.A. Yaghoubi, and M.S. Moayeri, Numerical Solution Of the k- Model of Air Flow Around a Simple Building, Proceedings of Third ISME Conference, May 1995, pp. 37-44 (in Persian).
  37. Rahnema, M., M. Yaghoubi, and H. Kazeminejad, Analysis of Steady State Laminar Flow and Heat Transfer Over Thick Plate, Proceedings of 4th Iranian Mechanical Conference, 44-56, 1996.
  38. Rahnema, M. and M. Yaghoubi, Analysis of Turbulent Flow in the Entrance Region of Thick Ducts, Proceedings of Forth Fluid Dynamics, 335-344, IRAN 1996.
  39. Rahnema, M. and M. Yaghoubi, Numerical Investigation of Turbulent Flow Around a Two-Dimensional Rectangular Block at Various Angle of Attacks, Proc. of Numerical Method in Laminar and Turbulent Flow, Vol. 1, 229-241, U.K., 1997.
  40. Rahnema, M. and M. Yaghoubi, Numerical Study of Flow Angle of Attack and Aspect Ratio in Turbulent Flow Around a Rectangular Prism, Proc. of Second International Seminar on Fluid Mechanics and Heat Transfer, Bangladesh, 1997.
  41. Rezvani, A., Yaghoubi, M. and Gh. Karami, Thermal Conductivity of Tire Compound, 1st Seminar on Iranian Tire, pp. 212-217, Tehran, Iran.
  42. Rezvani, A., Yaghoubi, M. and Gh. Karami, Thermal Analysis of Tire by Finite Element, 1st Seminar on Iranian Tire, pp. 218-222, Tehran, Iran.
  43. Yaghoubi, M. and R. Mehryar, Thermal Design of 250 kW Solar Power Plant, Proc. of 6th Congress of Iranian Society of Mechanical Engineers, Tehran, 1998.
  44. Yaghoubi, M., Zamankhan, P., Numerical Simulation of Wind Flow Over Series of Buildings, Proc. of 6th Congress of Iranian Society of Mechanical Engineering, Tehran, 1998.
  45. Atashkadi, P., and M. Yaghoubi, Two-Dimensional Unsteady Laminar Flow Around a Thick Plate, Proc. of 5th Fluid Dynamic Conference, pp. 109-117, Mashhad, Iran, 1998.
  46. Yaghoubi, M. and P. Zamankhan, Analysis of Turbulent Air Flow in and Around Two-Dimensional Buildings, Process of Third Int. Mechanical Engineering Congress, pp. 131-138, Tehran, 1998.
  47. Yaghoubi, M. and R. Mehryar, Design of 250 kW Thermal Power Plants in Iran, Proc. of Third Int. Mechanical Engineering Congress, pp. 593-600, Tehran, 1998.
  48. Karami, G., Yaghoubi, M. and M. Ghasemzadeh, Analysis of Heat Transfer in Water Cooled Jackets of a Furnace with Finite Element, Proc. of 7th Iranian Mechanical Engineering Congress, pp. 169-176, Zahedan, 1999.
  49. Katibeh, K., Yaghoubi, M., and Kh. Jafarpor, Thermal Structure of Doordzan Lake, Proc. of the Iranian Mechanical Engineering Congress, pp. 255-262, Zahedan, Iran, 1998.
  50. Yaghoubi, M., and A. Montazeri-Hedash, Multi-Grid Technique for Turbulent Seperated Flows, Proc. of 8 AFMC Congress, China, pp.545-549, 1999.
  51. Rahnanam, M., Farhadi, M., Mansory S.H., and Yaghoubi, M., Turbulent Natural Convection in a Two-Dimensional Horizontal Annulus, Proc. of 8 AFMC, 616-619,1999.
  52. Ghasem-Zadeh, M. Karami. Gh., and, Yaghoubi, M., Study of Cooling Plate Material and Fluid Flow on Heat Transfer from Cooling Jackets of Furnaces, Proc. of 6 Fluid Dynamic Conference, pp.79-87, (in Persian) 2000.
  53. Ghambary, N. Yaghoubi, M., and Molaw, D., Design Performances of Multistage Flash Distillation Systems, Proceedings of 8 Iranian Mechanical Engineering Congress, 2000.
  54. Katibeh, K., Jafarpor, Kh, and Yaghoubi, M., Effects of Environmental Conditions on Thermal Structure of Dorodzan Lake, Accepted for presentation in 8 Iranian Mechanical Engineering Congress, 2000.
  55. Kenary, G.A., and Yaghoubi, M., Thermal Performances of Parabolic Collector of Solar Thermal Power Plant, 5th National Chemical Engineering Congress, April, Shiraz, Iran, 2000.
  56. Yaghoubi, M. and Gohari, D., Neat Transfer of Recirculating flow Around Prisms with Incident Angle, Proceedings of 9th Mechanical Engineering Congress 2001.
  57. Kenari A., Yaghoubi, M., and Doroodgar, F., Experimental and Numerical Studies of a Solar Parabolic Trough Collector of 250 Pilot Solar Thermal Power Plant in Iran, Proceedings of Sharjah Solar Energy Conference, 2001.
  58. Zaringchang, J, Aghamohamadi, A. and M. Yaghoubi, Performances of A Solar Water Pump in Southern Part of Iran, , Proceedings of Sharjah Solar Energy Conference, 2001.
  59. Kenary A. and Yaghoubi M., Error Analysis of A Parabolic Solar Collector and Its Effect on The Performances of a Solar Thermal Power Plant, Proc. Of Fifth Int. Mech. Engi. Congress, ISME, Vol. 2, pp.335-342, IRAN, 2001.
  60. Yaghoubi, M. and Gohari, D. Rahnama, M., Turbulent Heat Transfer from Thick Plate with Incident Angle, Proc. of Fifth Int. Mech. Engineering. Congress, ISME, IRAN, Vol. 2, pp.119-127, 2001.
  61. Montazeri, A. and Yaghoubi, M., Numerical Solution of Air Flow Around Domed Roof Buildings by Multi-Grid Method, Proc. Of Fifth Int. Mechanical Engineering Congress, ISME, Iran, Vol. 4, pp.211-218, 2001.
  62. Yaghoubi M., Gohari, Dynamic of Turbulent Flow Around a Finite Thick Plate with Incident Angle, Proceedings of 5th ISIAF Gdansk, Poland, 621-627, 2001.
  63. Amnieh, H. and Yaghoubi, M. Three-dimensional laminar flow around parallel, Thick Plates, Proc. of 9th AFMC, Esfahan, 2002, Iran.
  64. Yaghoubi, M. , Kirkpatrick, P. A., and K. Knappmiller, Ventilation Performances in a Room with Uniform Contaminant Generation over the a Floor, Proc. of 9th AFMC, Esfahan, 2002, Iran.
  65. Yaghoubi, M. , H. Amnieh, Analysis of Laminar Flow and Heat Transfer Around Parallel Thick plates Over a Surface, Submitted to 12th International Heat Transfer Conference.
  66. Taheri M., Yaghoubi M., and Rahimi A., A review on the studies Carried out in Shiraz Universit about Energy Conservation in Buildings, Submitted to The First Fuel Consumption Optimization in Buildings, 2002, Iran.
  67. Yaghoubi, M. Aziziyan, K. and Kenary, A., Effect of Dust Contamination on the Performances of Solar Parabolic Collectors, Proc. of 2nd Mechanical Student Conference, Oromieh, Oct. 2001.
  68. Yaghoubi, M., Aminieh, H. and E. Velayati, Laminar Fluid flow and Heat Transfer from Stacks of Blunt Fins with Finite Length, Proceeding of 6th Congress on Engineering and System Design Analysis, Istanbul, Turkey, 2002.
  69. Yaghoubi, M., Sefidbakht and A. Kenray, Performance Variation of a 250 KW Solar Thermal Power Plant for Various Locations in Iran, Porc. Second Int. Conference on Energy Research and Development, Kuwait, 765.-775, April 2002.
  70. Yaghoubi, M., M. Mortazavi and A. Kenray, Numerical Analysis of Wind Flow Around Domed Roof Buildings, Proc. of 10th ISME congress, Vol. 5, pp.433-440, 2002.
  71. Yaghoubi, M., M. Vazin-Afzal and A. Kenary, Comparative Studies of Various Parabolic Trough Collector, Proceedings Of Energy Conference, Tehran, Iran, 2002.
  72. Yaghoubi, M. Azizian, and M. Rahi, Alternative Application of Solar Power Plant , ISEEE, Izmir, Turkey, 2003.
    Yaghoubi,M, and Mahamoody S., Experimental Study on Separated flows, Proceedings of 9th ISME Conference, Mashhad, Iran, 2003.
  73. Yaghoubi, M. Velayati, E., Three-dimensional turbulent flows around blunt Plates, Proceedings of 9th ISME Conference, Mashhad, Iran, 2003.
  74. Velayati, E. and Yaghoubi, M., Studies of conjugate heat transfer from single cube, Proceedings of 8th Iranian Fluid Dynamic Conference, p.21, Tabriz, Iran, 2003.
  75. Yaghoubi, M and Velayati, Wind flow behavior Around Curved Roof Buildings, Proceedings of 12th ISME Congress, 2004.
  76. Hesami, R. and Yaghoubi, M., Numerical Studies of Convective Heat Transfer from Wavy shape Ducts, Proceedings of 12th ISME Congress, Tehran, May 2004.
  77. Poor-Mahbob, R., Khayatian, A., and Yaghoubi M., Temperature control of the oil Cycle of the Solar Power Plant, Proceedings of 12th Mechanical Engineering Congress, Tehran, p.417, 2004.
  78. Yaghoubi, M., Design of the First Solar Power Plant in Iran, Proceedings of the First Eco-Energy Urumie, Iran, p.123, 2004 (Keynote Speech).
  79. Ghadiri, J., and Yaghoubi, M. Exergy Analysis of the Solar Thermal Power Plant, Proceedings of the First Eco-Energy Urumie, Iran, p.16, 2004.
  80. Yaghoubi, M. and K. Aziziyan, Studies for Solar Energy Applications in Iran based on Predicted Solar Potential, Proceedings of the First Eco-Energy, Urumie, Iran, p.16, 2004.
  81. Yaghoubi, M. and Velayati, E., Analysis of Turbulent Convective Heat Transfer Around a Wall Mounted Cube, Proc. of Int. Mech. Congress,pp.209-217, Kuwait, Dec. 2004.
  82. Yaghoubi M. and Velayati, E. Analysis of Wind Flow Around Various Domes Type Roofs, Proc. Int. Mech. Congress, Kuwait, Dec. 2004.
  83. Yaghoubi, M., Aziziyan, K., Salim-Shirazi, M. and Kanan, P., Shiraz Solar Power Plant Simulation with Heat Exchanger Performance, Proc. of ESDA2004, paper No. 58537, Manchester, England, 2004.
  84. Zeini. M.J., J.M. Eghtesad and M.Yaghoubi, Hybrid Modeling and Switching Control of a Complete Oil Cycle of A Solar Plant, , Proc. Int. Mech. Congress, Kuwait, Dec. 2004.
  85. Heidar A. , Yaghoubi M. and E. Goshtasbirad, Numerical Analysis of Three Dimensional Fluid Flow Around a Mounted Cube with Multigrid Method, Proc. 9th Iranian Fluid Dynamic Conference, p.63, 2005.
  86. Mohamadi, M., Yaghoubi, M., & Goshtasbirad, E., Numerical Simulation of Spray Dryer with Cooling Jacket, Proc. 9th Iranian Fluid Dynamic Conference, p.97, 2005.
  87. Bozrogzad, E. and M. Yaghoubi, Numerical Modeling of Frost formation over a Cold Surface, Accepted for presentation in the 13th Mechanical Engineering Conference, Esfahan, Iran, May 2005.
  88. Naeeni, N. and M. Yaghoubi, Analysis of 3-D Turbulent flow Around a Parabolic Collector, Proc. of 6th Asia-Pacific Conference on Wind Engineering, p.149, Korea, Sept. 2005.
  89. Samareh, B and M. Yaghoubi, Two-Dimensional Numerical Simulation of Wind Flow around a Large Parabolic Collector, , Proc. of 6th Asia-Pacific Conference on Wind Engineering, , p.151, Korea, Sept. 2005.
  90. Yaghoub, M and M.H. Bahmani, and M. Taheri, Thermal Performance of a Vaulted Roof Building with Wind Blowing Condition, Proc. of the Int. Conference on Recent Advances in Mechanical and Material Engineering, Kuala Lumpur, Malaysia, May 2005.
  91. Salmanpour, M. and M. Yaghoubi, Numerical Simulation of Frost Formation Through a Cold Duct with Fully Developed Turbulent Flow, Proc. of the Int. Conference on Recent Advances in Mechanical and Material Engineering, Kuala Lumpur, Malaysia, May 2005.
  92. Zeini, M.J., Eghtesad, M. Yaghoubi, M., Fuzzy Switching Control of the Complete Oil Cycle of Shiraz Solar Power Plant, Proceedings of Int. Symposium on Energy, Information and Cybernetics, EIC ‘05”, pp.274-379, USA, 2005.
  93. Mohammadi, M. Yaghoubi, and A. Goshtasbi Rad, Simulation of Spray dryer with Cooling Air Jacket by Computational Fluid Dynamics, Proceedings of 2th International Conference on Thermal Engineering: Theory and Applications, Al-Ain, United Arab Emirates, p. 49, 2006.
  94. Yaghoubi, M., and S. Arebi, Simulation of turbulent Wind Flow over an Array of Parabolic collectors, ISME Congress, Esfahan, Iran, p.333., 2006.
  95. Naeeni, N. & M. Yaghoubi, Analysis of 3-D Turbulent Wind Around a Parabolic Collector, 2nd IC- SCCE Congress, Athen, Greece, p.67, 2006.
  96. Hridari, A, M. Yaghoubi, & E.Goshtasbi-Rod, Accelerating Simple Algorithm by Multigrid Method 2nd IC-SCCE Congress, Athen, Greece, p.11, 2006.
  97. Diyalameh, M. Yaghoubi, and O. Aboali, Natural Convection Heat Transfer from an array of Horizontal Rectangular Thick Fins, Proceedings, of 14th Mechanical Engineering Congress, Esfahan, p. 150, 2006.
  98. Yaghoubi, M., Ghafari, M., &Pakpor, L., Technology , foresight, comparison of Science and Technology in 30 countries, Proceedings of Futuring, Technology for Development, Amirkiabir University, Khordad ,B1-3, 2006.
  99. Ghafari, M., Yaghoubi, M. & Pakpor, L., Science and Technology Foresight, Proceedings of Futuring, Technology for Development, Amirkiabir University, Khordad ,A-3, 2006.
  100. Salmanpor, M. Yaghoubi, M., Numerical Analysis of frost growth for turbulent flow in a 2-D duct, 13th Int. Heat and Mass Transfer Conference, Book of Abstract p. 25, Australia, 2006.
  101. Yaghoubi, M. and Mokhtari, A., Solar Potential for Solar Power Plant in Iran, Proceedings 1th Int. Conference, Energy Management and Planning, Tehran ,June, 2006.
  102. Taheri, M. and Yaghoubi, M. Books of Articles on the Memorandum of Dr. Bahadori, Academy of Sciences, I.R. Iran, 2006.
  103. Hadavand, M., Yaghoubi, M., Emdad, H., Analysis of two-dimensional turbulent flow around vaulted and flat roofs building, Proceedings of 10th Fuild Dynamic Conference, Yazd, Nov. 2006.
  104. Raeszadeh, F., Yaghoubi, M., Goshtabi Rad, Analysis of turbulent air flow over curved shape roof with hot wire anemometry, Proceedings of 10th Fuild Dynamic Conference, Yazd, Nov. 2006.
  105. Alborzi, H. ,Yaghoubi, M., Hesami, R., and Mirhadi, S., Measurement of a collector modified incident angle by solar radiation flux, Proceedings of PSC-2006, Nov. 2006,Tehran, Iran, pp.2132-2144.
  106. Yaghoubi, M. and Ghaffari, M.M., The rule of the government in science and technology policy, Proceedings of 3th International Congress on Cooperation between Government, Industries and Universities, Dec. 2006, p. 11, Tehran, Iran.
  107. Dialameh,L, M. Yaghoubi, Conjugate natural convection and conduction from an array of cubes on a horizontal surface, Heat-Set 2007 Conference, France.
  108. Hadavand M. and M. Yaghoubi, Thermal exchange of vaulted roofs exposed to solar radiation for various wind directions , Heat-Set 2007 Conference, France.
  109. Mokhtari1, A. , M. Yaghoubi1*, P. Kanan2, A. Vadiee1. R. Hessami1. Thermal and optical study of parabolic trough collectors of Shiraz solar power plant, Abstract is accepted for presentation in The Third Int. Conference on Thermal Engineering, May 2007, Jordan.
  110. Yaghoubi, M., A. Mokhtari and R. Hesami, Thermo-economic Analysis of Shiraz Solar Power Plant, Abstarct acceptede for presentation in The Third Int. Conference on Thermal Enigineering: Theory and Application, Jordan, 2007.
  111. Mokhtari, A. , M. Yaghoubi, S. Chegeni, Thermo-economic Design of Parabolic collector, MEMEC-2007 Middle East Mechanical EXPO Conference and Exhibition, Bahrain, 2007.
  112. Mokhtari, A., M. Yaghoubi, S. Chegeni, Cost reduction schemes for solar thermal power plants with parabolic collectors, First Iranian Conference on Optimiziation of Energy Consumtion, Sajad University, Mashahd, Iran, 2007.
  113. Yaghoubi, M., J. Hejazi and M.M. Ghafari, Aspect of science development and aspect of technology development, Proceedings of IR. Iran Development Program in 1404, Vol. 4, pp. 57-76, 2007(in Persian).
  114. Tooraj Yousefi, Reza Fazeli, Amir hossein Eshtiaghi, Mehdi Ashjaee, Mahmood Yaghoubi, Interferometry and Neural Network Investigation of Natural Convection Heat Transfer from a Cylinder Array and Below an Adiabatic Ceiling, Proceedings of The Second International Conference on Modeling Simulation and Optimization, Abu Dhabi, 2007.
  115. Salmanpour M., and M,. Yaghoubi, Numerical Analysis of Frost Growth for Turbulent Flow in a 2-Dimensional Duct, Proceedings of 13 International Heat Transfer Conference, MPH-01, Australia, 2006.
  116. Aziziyan, K., M. Yaghoubi, S. Morhadi, and R. Hesami, The progresses of construction of Shiraz Power plant, First Iranian Energy Conservation, Mashhad, Iran ,2007.
  117. Mokhtari, A., M. Yaghoubi and P. Kanan, Thermal analysis of Shiraz power plant collector field in summer and Fall, First Iranian Energy Conservation , Mashhad, Iran , 2007.
  118. Mokhtari, A., M. Yaghoubi, S Chegeni, Methods of reducing electricity production cost of solar thermal power plant, First Iranian Energy Conservation, .Mashhad, Iran, 2007.
  119. Yaghoubi,M., M.M. Ghafari, and M. Pakpor, The role of Government in Science and Technology of Japan, Proceedings of Abstracts 12th Conference of Government, University and Industry, Tehran, p.16-17, 2008.
  120. Raiszadeh, F., M. Yaghouhi, E. Goshtasbi-rod, Experimental and Numerical studies of wind flow over arc roofs, Proceedings of 11th Fluid Mechanic Conference, Tehran, Iran, FD2008—1395, 2008.
  121. Choobineh, L., A. Raisi, M. Yaghoubi, Thermal conductivity and heat transfer in a semiconductor nano-tube, Proceedings of CHT-08, International Symposium on Advances in Computational Heat Transfer, Moracco, CHT-08-156, 2008.
  122. Mehdizadeh, M., M. Yaghoubi, Thermal Behavior of series of vaulted and flat roofs exposed to wind flow and solar radiation, Proceedings of CHT-08, International Symposium on Advances in Computational Heat Transfer, Moracco, CHT-08-254, 2008.
  123. Eshtiyaghi, A.H., D. Ehaei, M. Yaghoubi, M. Ashjaee, Free convection from a horizontal array of cylenders beneath an inclined adiabatic ceiling, Proceedings of CHT-08, International Symposium on Advances in Computational Heat Transfer, Moracco, CHT-08-376, 2008.
  124. Mohamadi, A., H.R. Mortazavi, M. Yaghoubi, A new correlation to predict local convection heat transfer in a SI engine, Proceedings of 16th Conference of Mechanical Engineers, Kerman, Iran, 2008.
  125. Kanan, P., A. Mokhtari,H. Pakravan, M. Yaghoubi, Thermal and optical performances of Shiraz Solar Power Plant during a year, Proceedings of 16th Conference of Mechanical Engineers, Kerman, Iran, 2008.
  126. Khoshnezar, H. and M. Yaghoubi, Study of natural frost formation on a horizontal cylinder, Proceedings of 16th Conference of Mechanical Engineers, Kerman, Iran, 2008.
  127. Bahadori, M., M. Yaghoubi, Ethics in Engineering as a Prerequisite for Technical Development of Proceedins of Sciences, Int. Workshop Science and Technology and the Future Development of Societies, The National Research Council Press, pp.117-124, 2008.
  128. Hasan, M. E., Yaghoubi, M., Ragheb, A. M., Improving thermal performances of a counter flow microchannel heat exchanger by using nanofluid, Proceedings of ICTEA-2009, Abu-Dhabi, 2009.
  129. Tahavor, A. R., Yaghoubi, M., Natural convection from a column of cooled horizontal cylinders using ANN, Proceedings of ICTEA-2009, Abu-Dhabi, 2009.
  130. Shaeri, M. R., Yaghoubi, M., Three-dimensional simulation of fluid flow and heat transfer around an array of rectangular fins with incident angle, Proceedings of ICTEA-2009, Abu-Dhabi, 2009.
  131. Yaghoubi, M., Studies of environmental compatible buildings using domed roof architectures for passive cooling in hot arid regions of Iran, AASA Beijing work-shop on Sustainable Energy Development in Asia, PP. 196-210, China, 2008.
  132. K. Aziziana, M. Yaghoubib, J. Ghadiri c Optimal Performance of Shiraz Solar Thermal Power Plant by Exergy Analysis, Proceedings of ICTEA-2009, Abu-Dhabi, 2009.
  133. A. Baghernezhad *a, M. Yaghoubi Energy, exergy and second law performance of parabolic Trough collector integration into combined cycle system (ISCCS), Proceedings of ICTEA-2009, Abu-Dhabi, 2009.
  134. Homayoni, H., M. Yaghoubi, Analysis of natural convection around a cooled horizontal isothermal circular cylinder by local-similarity method, Proceedings of ICTEA-2009, 2009 Abu Dhabi United Arab Emirates.
  135. H. Homayoni a, H. Izanb,M. Yaghoubi, Pseudospectral solution of natural convection around a horizontal isothermal circular cylinder, Proceedings of ICTEA-2009, Abu-Dhabi, 2009.
  136. M. Yaghoubi, M.M. Ghafari, Social and cultural skills, in Engineering Education, Proceedings of Engineering Education, Creativity and Innovation, Rasht, (Iran) March, 2009.
  137. M.M. Tavakol, M. Yaghoubi, Air flow analysis over a hemisphere attached on a flat surface with thick boundary layer, Proceedings of 12th Fluid Dynamic Conference, Babol, IRAN, April, 2009.
  138. M.M. Tavakol, M.Yaghoubi, An experimental and numerical investigation of air flow over a wall mounted hemisphere inside a channel, 17th ISME Conference, Tehran, Iran, 2009.
  139. M. Yaghoubi, U. Armodly and P. Kanan, Shiraz Solar power Plant Constructionm and Steam generation, Proceedings of SolarPaces 2009 Conference, Berlin, Germany, Sep. 2009.
  140. A. Baghernejad, M. Yaghoubi, Thermoeconomic Analysis of Parabolic trough Collector Integration into Combined Cycle Syste, Proceedings. of SolarPaces 2009 Conference, Berlin, Germany, Sep. 2009.
  141. M. Yaghoubi, A.R. Tahavvor, An experimental study of frost formation on a horizontal circular cylinder in natural convection flo, Proc. ISMT-ASME Heat and Mass Transfer Conference, Jan., 2010, Mumbai, INDIA.
  142. B. Nabovati, M. Yaghoubi, Experimental study of condensation heat transfer over an inclind tube, Proc. ISMT-ASME Heat and Mass Transfer Conference, Jan., 2010, Mumbai, INDIA.
  143. M. Yaghoubi, H. Khoshnazar, Experimental study of natural frost formation on a horizontal cylinder, 10th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, June, 2010, Chicahgo.
  144. M. Yaghoubi, P. Haghi, Numerical analysis of convection heat transfer over multiple roof buildings, 10th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, June, 2010, Chicahgo.
  145. A. Baghernejad, M. Yaghoub Genetic algorithm for multi-objective exergetic and economic optimization of parabolic trough collectors integration into combined cycle system (ISCCS), Proceedings of the ASME 2010 10th Biennial Congerence on Engineering System Design and Analysis, Estanbul, Turky, July, 2010.
  146. K. Azizian, M. Yaghoubi, R. Hessami. S. Mirhadi, Shiraz pilot thermal solar mpower plant design, construction, installation and commissioning procedure, Proceedings HEFAT2010.
  147. 7thInternational Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 19-21 July 2010 Antalya, Turkey.
  148. M. Mahadavi, M. Yaghoub, Experimental study of natural frost formation over a horizontal finned tubes, Proceedings of 13th Fluid Dynamic Conference, Paper 1712, Shiraz, Iran,, October 2010.
  149. HR Gezavati, Mn. Faafar, M. Yaghoubi, M.A. Hedayatizadeh, M. Ghigi, Urban car cabin exposure to carbonmonoxide in Selangorm Mayalysia, International Conference in Sustainable Mobility, Dec. 2010, Kuala Lumpur, 2010.
  150. M. Yaghoubi, K. Azizian, P. Kanan, Analysis, design, construction and performance evaluation of developed Shiraz solar thermal power plant, Proceedings of The role of Hi-Tech in Human Prosperity, Feb, 2011, Kish, Iran, pp. 21-29.
  151. M.M. Tavakol, M. Yaghoubi, Numerical analysis of air flow arpund a wall mounted hemisphere with different turbulence modles, Proceedings of Natinal congference on new technologies in Mechanical Engineering, Feb. 2011, Shiraz, Iran.
  152. A. Rahmatmand, M. Yaghoubi, E. Goshtasbi Rad, Analysis of passive ventilation for curved roof building and comparison with flat roof, Proceedings of 2th National Conference on Industrial Ventialion, Feb. 2011, Tehran, Iran ( in Persian).
  153. M. Mahdavi, M., Yaghoubi, Experimental study of frost formation on finned tube of Industrial cooling systems, Proceedings of 2th National Conference on Industrial Ventilation, Feb. 2011, Tehran, Iran(in Persian).
  154. K. Azizian, M. Yaghoubi, R. Hesami, P. Kanan, Design analysis for expansion of Shiraz solar power plant to 500 kW power generation capacity, Proceedings of World Renewable Energy congress, Linkoping, Sweden, May 2011.
  155. M. Yaghoubi,, S. Zarrini, S. Mirhadi, Optimum integration of a large size collector to a solar thermal power plant, Proceedings of World Renewable Energy congress, Linkoping, Sweden, May 2011.
  156. M.H. Sedaghat, M. Yaghoubi, M.J. Maghrebi, A. Sarreshetdaru, Comparison of convection heat transfer from a horizontal cylinder over an insulated surface from Fluiebt and OpenFoam software, Proceedings of 19th Annual conference of Mechanical Engineering May 2011, Birjand, Iran (in Persian).
  157. A. Rahmatmand, M. Yaghoubi. E. Goshtasbe-rod, 3D numerical analysis of natural ventilation of buildings with dome and flat roofs, 7th International Conference on Computational Heat Transfer, Istanbul, Turkey, July, 2011.
  158. M. Yaghoubi. M. golbahari, R. Rohi, 3D numerical study of combined free and force convection in an inclined channel with heat sources, 7th International Conference on Computational Heat Transfer, Istanbul, Turkey, July, 2011.
  159. M. M. Tavakol, O. Abouali, M. Yaghoubi Heat transfer feature of nanofluid for turbulent impinging jet, 7th International Conference on Computational Heat Transfer, Istanbul, Turkey, July, 2011.
  160. M. Yaghoubi, R. Rohi, A. Dastbelaraki, Numerical analysis of turbulent flow and heat transfer from an array of perforated trapezoidal fins. 7th International Conference on Computational Heat Transfer, Istanbul, Turkey, July, 2011.

Research Projects

  1. Experimental Study of Solar Energy Potential in Shiraz, Founded by Shiraz University, 1983.
  2. Natural Ventilation and Comfort in Passive Cooling Buildings, Founded by Shiraz University, 1985.
  3. Analysis of Heat and Mass Transfer from Humid Air over a Cooled Flat Plate, (with Dr. Kazeminejad), 1992.
  4. A Study Buildings Heating and Cooling Load with Respect to Orientation, (with Dr. Taheri), Founded by Shiraz University, 1994.
  5. A Survey of Engineering Education in the Developed Countries, Founded by Academy of Sciences, 1998.
  6. Design, Construction and Testing of the First 250 KW Solar Thermal Power Plant with Parabolic Solar Trough Collectors in Iran, Founded by Vice Minister in Energy Affairs, Minister of Energy, IRAN, 1996-continues.
  7. Heat and Mass Transfer in Laminar and Turbulent Flows, Founded by Shiraz University, 1997.
  8. Fluid Flow and Heat Transfer in Recirculating Flows, Founded by Shiraz University Research Council, 2000.
  9. Design and Construction Of 75 m2 Parabolic Trough Collector, Founded by Vice Minister in Energy Affairs, Minister of Power, IRAN, 1996-2001.
  10. Studies of Solar Energy potential in Yasooj, Iran (with Zandehbodi), 2002.
  11. Ethics of Engineers, Iranian Academy of Science, ( with Dr. Bahadori) 2003.
  12. A Survey of Ph.D Education Programs, Team working in Iranian Academy of Science, 2002.
  13. An Appropriate Model for Science and Technology Development Policy with relation to Engineering, Academy of Sciences of I. R. of Iran, 2004 - 2006. 

Given Seminars

Keynote Speeches

  • Fluid Flow Visualization, First Iranian Mechanical Engineering Congress, Tehran University, 1993.
  • Numerical Study of Flow Angle of Attack and Aspect Ratio in Turbulent Flow Around a Rectangular Prism, Bangladash Technical University, 1997.
  • Engineering Education in Iran, Iranian Society of Mechanical Engineers, 1998.
  • Solar Power Plant in the World and Iranian 250 kW Solar Thermal power plant, Shahid Abaspor University, 2004.
  • Design and Construction of First 250 kW Solar Thermal Power Plant, Iranian Society of Mechanical Engineers, 2004.
  • Solar Energy and Solar Thermal Power Plant, Eco-Energy, Oromieh University, 2004.
  • Solar Radiation and Methods of estimating Solar Potential in Iran, Renewable Energy Work Shop International Center for Science & High Technology & Environmental Science, Dec. Kerman, Iran, 2006.
  • Solar Thermal power plant in the World and Shiraz Solar Power Plant, Renewable Energy Work Shop International Center for Science & High Technology & Environmental Science, Kerman, Iran, Dec. 2006.
  • Design, Construction of Shiraz Solar Power plants, Fuel, Energy and Environment National Congress, May, 2008, Tehran, Iran.
    The state of art in Engineering Education, The first Symposium in Engineering Education, Innovation and Creativity, Rasht, Iran, March 2009.
  • Passive Cooling of Domed Roof Buildings, 2nd International Conference on Heating, Ventilation and Air Conditioning, June, 2010, Tehran, Iran. 

Courses Taught

Under Graduate level

  • Thermodynamics
  • Fluid Mechanics
  • Heat Transfer
  • Heat and Mass transfer
  • Heat Transfer Laboratory
  • Ventilation and Air-conditioning
  • Heat Exchanger Design
  • Numerical methods
  • Mechanical Systems of Air-conditioning

Graduate level

  • Advance Conduction Heat Transfer
  • Advance Convection Heat Transfer
  • Computational Heat Transfer
  • Solar Energy Engineering

Honors and Awards

  • 1992 Distinguished Professor for the year, Shiraz University, Shiraz, Iran.
  • 1993 Distinguished Professor for the year, Shiraz University, Shiraz, Iran.
  • 1994 Distinguished Professor for the year, Shiraz University, Shiraz, Iran.
  • 1995 Abadi prize, for the best project in optimization of building energy consumption, Ministry of building, Iran.
  • 1996 Distinguished Professor for the year, Shiraz University, Shiraz, Iran.
  • 1997 Research Excellence, Shiraz University.
  • 1998 Distinguished Mechanical Engineering Professor, Iranian Society of Mechanical Engineers.
  • 1999 High Rank Research Founder of Shiraz University, Shiraz University.
  • 2000 Letter of Research Excellence, Kharzami Prize Organization.
  • 2000 High Rank Research Founder of Shiraz University, Shiraz University.
  • 2001 Chehraye Mondegar, (Iranian Distinguished National Scholars) Radio-Television, Islamic Republic of Iran.
  • 2002 University Award for High University-Industry Grants.
  • 2003 Letter of Award for Research Cooperation with Industry from Fars Electricity Co. Iran.
  • 2003 Letter of Research Excellence , Engineering School, Shiraz University.
  • 2004 Letter of Award for the best MS Advisor in Mechanical Engineering, Iranian Mechanical Engineering Society.
  • 2005 Research Excellence, Shiraz University.
  • 2006 Research Excellence, Mechanical Engr. Dept., Shiraz University
  • 2007 Iranian Distinguished Professor, (Award from the President of I.R. Iran).
  • 2007 Research Excellence of the year, Mechanical Engineering Dept., Shiraz University 2007 Research Excellence of the year, Engineering School, Shiraz University
  • 2008 Book of the year, Award from the President of I.R. Iran
  • 2008 Best book in Mechanical Engineering, Tehran University Award, Tehran, Iran
  • 2008 Best book in Mechanical Engineering, Sharif University, Tehran, Iran
  • 2009 Kharazmi International Award
  • 2009 Islamic Cultural and Educational Award
  • 2009 Fars province award for the 30th year of I.R. Iran science and Technology development
  • 2009 Amirkabir University Award for the best published book in Engineering
  • 2009 Award for best project of 30 years in Fars Province, Local Fars Governor
  • 2009 Research Excellence of the year, Mechanical Engineering School,, Shiraz University
  • 2010 Research Excellence of the year, Mechanical Engineering School,, Shiraz University
  • 2011 Shiraz University Educational Award 
View: 9754 Time(s)   |   Print: 1300 Time(s)   |   Email: 151 Time(s)   |   0 Comment(s)



Write the security code in the box    

© 2015 All Rights Reserved | Iran University of Science & Technology

Designed & Developed by : Yektaweb